42 Poker Run rerig
#122
Platinum Member
Platinum Member
Thread Starter
Me too!
#123
Platinum Member
Platinum Member
Thread Starter
#124
Platinum Member
Platinum Member
Thread Starter
#127
Platinum Member
Platinum Member
Thread Starter
Finishing up engine mounts, took lowers off drives they are going to Wilson for blueprinting. Trailer is going back to Myco to be rebunked, sandblasted and painted. It was originally built for a fountain but it was modified to fit a cigarette. Island Racing is working with RFD on a new cylinder head to move our torque curve up about 800 rpm.
Business has been swamped so it has been slow progress on the boat. Will post some more pics soon.
Business has been swamped so it has been slow progress on the boat. Will post some more pics soon.
#128
Platinum Member
Platinum Member
Thread Starter
Dropped trailer off at Myco. Lower units are at Wilson's. Should be picking them up in about 3 weeks. Working with CMI on exhaust. Marked out holes on transom for pipes.
Going with big tubes 2 1/4 inch primary's, 5 inch tails. Dry to the tip. Shotgun setup.
Going with big tubes 2 1/4 inch primary's, 5 inch tails. Dry to the tip. Shotgun setup.
#129
Platinum Member
Platinum Member
Thread Starter
Decided on a cylinder head casting, going to use the brodix head hunter. We will get the castings without guides, seats and ports. Will have the castings polished then anodized. Then they will go to RFD for cnc porting and seats and guides installed. Will post some pics once we get them.
#130
Platinum Member
Platinum Member
Thread Starter