K&N Flame Arresters
The following 2 users liked this post by 1 MAIDEN AMERICA:
liberator221 (12-19-2021), Sydwayz (12-20-2021)
#3
Registered
Search articfriends posts. He did dyno testing on flame arrestees on 502mag.
Think his take away was “save your money”
Dont know on 8.1 though.
Think his take away was “save your money”
Dont know on 8.1 though.
#5
No, the factory air cleaner flows better. Just keep it clean. There was a test done several years ago on such.
I don't remember how many layers of screens there are on it, but at one point they removed all but one layer, and it still maintained the "spark protection Coast Guard requirement" stamp on it, so you could do that although not smart.
I don't remember how many layers of screens there are on it, but at one point they removed all but one layer, and it still maintained the "spark protection Coast Guard requirement" stamp on it, so you could do that although not smart.
Last edited by Sydwayz; 01-10-2022 at 10:22 AM.
The following users liked this post:
Sydwayz (01-10-2022)