Trim cables
#1
Platinum Member
Platinum Member
Thread Starter
Trim cables
I have a 2007 42 fountain exc. Does anyone know the numbers or length of the trim indicator cables ?
Thanks..
Thanks..
#2
If it were me, I'd reach out to these guys: https://www.facebook.com/R3CustomMarine
Source from them in exchange for providing the knowledge.
Source from them in exchange for providing the knowledge.
The following users liked this post:
bajarick (06-08-2023)
#3
Registered
The cable lengths are marked on the cables themselves. I'm assuming you haven't removed the old ones yet?
#4
Platinum Member
Platinum Member
Thread Starter
#5
Platinum Member
Platinum Member
Thread Starter
If it were me, I'd reach out to these guys: https://www.facebook.com/R3CustomMarine
Source from them in exchange for providing the knowledge.
Source from them in exchange for providing the knowledge.
#7
Registered
iTrader: (1)
On my 2008 42 Lightning the trim tab cables are Mercury Platinum. Port side is 28’ starboard is 22’. I’m trying to find the drive trim cable lengths but have not found any markings. If your going to tear it out for tabs you might has well replace the drive indicator cables.
Look through the slots to see the connection to the pointer arms. It is a threaded rod. Make sure you order the right connectors on each end as there are many to select from.
Look through the slots to see the connection to the pointer arms. It is a threaded rod. Make sure you order the right connectors on each end as there are many to select from.