47 Fountain Lightning Project
#74
Head room, Not sure bu I would guess 5'11
I am still holding on the engines, I have enough work to do in the engine compartment now. I'm taking my time at it too. I ordered a Gantry Crane to put the engines in so I am getting things ready. Possibly Late summer.
As far as paint, I dont know for sure I Think a PPG? You better sak him.
I am still holding on the engines, I have enough work to do in the engine compartment now. I'm taking my time at it too. I ordered a Gantry Crane to put the engines in so I am getting things ready. Possibly Late summer.
As far as paint, I dont know for sure I Think a PPG? You better sak him.
__________________
Ray
Ray
#77
I decided to go with HP500EFI's Not my first choice but I think the most reasonable. They are well known and can be upgraded later if need be.
I have found one engine, a 2002 with only a few hours, I need two more.
Inthered, What props are you using on your setup? Bravo1's or hydromotives? and what pitch. I have Bravo 1 's 30's and 32's but I need to buy one more to match for the center engine. I am thinking 30's would be a good place to start.
I have found one engine, a 2002 with only a few hours, I need two more.
Inthered, What props are you using on your setup? Bravo1's or hydromotives? and what pitch. I have Bravo 1 's 30's and 32's but I need to buy one more to match for the center engine. I am thinking 30's would be a good place to start.
__________________
Ray
Ray
#79
Thanks I have, They are asking 30K for both, I think that is too High. I can get new ones for about 20K each. For 5 K each I think it's worth having new ones. OSO's have abou 150 Hours oon them and I would feel better having the top end rebult.
__________________
Ray
Ray




By the way, what is the headroom.