Ask FTN MAN what he's got planned for his honeymoon:) :) :)

Ahhhhh....Three weeks in Az!!!! Taking the fountain to lake Havasu for a week, then to Lake Mead and if we have time Lake Texoma on the way home. Alittle early summer for me!!!!!Cannot wait.

Breath later

Where do you get the bilge paint. I'm thinking about painting mine while I have the engine out. thanks JimV

JimV,

The bilge paint is Interlux Bilgekote (white) BoatUS usually has it.

West Marine only has the grey. You should do 2 coats.

Thanks,

Mark S.

Battery adapter machined from 6061 alum stock.

This will allow the optima holder to fit into the std. battery holder without drilling more holes into the bottom of the bilge. The cutout was milled out for drainage.

Engine installation day. My workshop is in a vacant area of our building addition so I welded up an adapter to mount the 1 ton hoist to the forklift.

Another view:

Engine installed showing cutout in rear seat bulkhead for supercharger pulleys.

Top view of engine installed.

Cutout with belt installed.