38' Fever project
#11
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
No, the IMCO's were for a customer. The hatch will be finished in white, and new graphics will go across it. The top will be upholstered w/ fountain logo. I tried to buy a hatch from Fountain, but it's no longer available. So we're building it, and the race fairing, in house. Its only 10" higher than stock.
I have some XR's, but I'm not sure we'll do for drives yet.
Will post more pics next week.
I have some XR's, but I'm not sure we'll do for drives yet.
Will post more pics next week.
#14
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
The hatch is being built w/ 1/4' fir, and then will be glassed over w/ 3 layers in and out. Then it will be sanded w/ along board sander, and we will use homemade fairing compound. Its a combination of west systems epoxy resin, micro balloons and talc powder. Much stronger and easier to work with than Bondo.
The windshield will be used as a templet to build the fairing, then will be sold. The sides are in great shape. The front has alot of small cracks in it.
I could have you one built, we will also be selling the fairings soon too.
Steve
The windshield will be used as a templet to build the fairing, then will be sold. The sides are in great shape. The front has alot of small cracks in it.
I could have you one built, we will also be selling the fairings soon too.
Steve
#15
clean your box!! I tried to PM you but you had to many messages...It was great talking with you today and I want you to see what I can get for the Prochargers...Thanks
I'll call you back Tuesday
I'll call you back Tuesday