amps behind side panel how do you get behind that
01-03-2004 | 12:25 PM
#1
Thread Starter
Registered
Joined: Jul 2002
Posts: 209
Likes: 0
From: HUNTON, VA
amps behind side panel how do you get behind that
panel
35 fountain lighting
three amp behind do i have to take out seats?
hydro lines to seat also?
35 fountain lighting
three amp behind do i have to take out seats?
hydro lines to seat also?
Last edited by TOMMY HIWAVE; 01-04-2004 at 01:40 PM.
01-06-2004 | 07:54 PM
#3
Registered
Joined: Jul 2001
Posts: 5,242
Likes: 0
From: Tinley Park, IL
TOMMY HIWAVE,
To remove the panel you have to remove the bolster. There are three bolts holding the bolster to the side. The hydraulic lines have to come off and they will drip fluid. I capped them to minimize the mess. The wiring for the switch has to be cut also. The panel is held on with 10? screws.
Dan
To remove the panel you have to remove the bolster. There are three bolts holding the bolster to the side. The hydraulic lines have to come off and they will drip fluid. I capped them to minimize the mess. The wiring for the switch has to be cut also. The panel is held on with 10? screws.
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Kool-Aid Man
Cigarette
0
03-10-2008 12:10 PM
