1999 lightning parts
 

Need all cabin doors and center cabin coushion

Re: 1999 lightning parts
 

[QUOTE=fourplaydave69]Need all cabin doors and center cabin cushion , rub il insert , for 35Ft.

Re: 1999 lightning parts
 

Must be for the ebay boat. Did you strike a deal for it?

Re: 1999 lightning parts
 

After the first listing expired, I contacted the owner several days later.

Re: 1999 lightning parts
 

Good luck, it appeared to be a nice boat.

The rubrail insert is available from Taco and can be ordered through West Marine. I can not remember if this boat had the white insert or not, but Fountain did not use the bright white insert and Taco offers several different white inserts for this rubrail.

Re: 1999 lightning parts
 

Thanks for the tip on the rubrail. Now all I need to do is sell my low hour 1997 fever.

Re: 1999 lightning parts
 

any pics or ebay link Congrats on new purchase

Re: 1999 lightning parts
 

Not real handy with puter yet. Will post pics. when I get it home this weekend. Thanks David

Re: 1999 lightning parts
 

so cal boat???

Re: 1999 lightning parts
 

Thats the one.

Re: 1999 lightning parts
 

i went to the platicks store in kc and macthed verry close i bought a heat strip and fabed doors and windoes for 350 bucks as fountaion 1800 just for the windsheild

Re: 1999 lightning parts
 

Do you mean heat gun?? Just now getting around to the interior. As rounded up HP gimble upgrades,other outdrive parts. Chris at sterndrivespec. in NY. has been very helpful.

Re: 1999 lightning parts
 

By the way, I found both bolster motors were shot. Motion systems corp. in New Jersey has the motors . 732-222-1800

Re: 1999 lightning parts
 

Dave
Hows the project coming?
Any pics?

Re: 1999 lightning parts
 

Thanks for asking. Replaced all breakers, trim units. Thought the end was near then got upset with the trailer that came with it so went to Loadmaster in Port Clinton in April and had new trailer put under it. Was getting ready to set one engine in and got busy at work. Just getting ready to get motor aligned. Wish I had the stock tubular mounts that fountain use to make. Now with the stock merc offshore mounts , must use new alum angles and redrill. I am sure it will just be time consuming. I am starting to wonder if this had boxes on it?? Will post some pictures soon. David

Re: 1999 lightning parts
 

type the hull id # in a yahoo search.
When I was looking at that boat yahoo pulled up a couple of pics. I dont remember seeing any boxes though.

Re: 1999 lightning parts
 

JRyan26.Did you get another boat? Dave

Re: 1999 lightning parts
 

I recently got a 1995 35' with hp500s. Im working on a deal to trade the motors for some 572's though.