Re-rig on the 29
11-06-2007 | 03:44 PM
#61
Registered
Joined: Aug 2007
Posts: 49
Likes: 0
From: Columbia, TN
Confused??
I am looking to restore my 96 29' Fever this winter and I had talked to Livorsi who told me that it was impossible for my dash to take monster gauges. I was going to order the whole thing, similar to the picture you showed; dash panel, monster gauges, billet throttles, indicators, switches, lights, the whole shebang, and they said that I could only run a 3 5/8" speedo with 3 3/8" tachs and everything else in 2". Do you know who you talked to or possibly have the bill of sale or a quote with the part #'s on it. I desperately want the big boys in the dash if I can swing it, but was told I couldn't. This is priority number 1 since half of them don;t work from when I bought the boat in July. Any insight would help!
I re-wired the the boat from the panel back. Again, it's nice to have these parts available. The main engine harnesses make a huge difference on a job like this. I can't tell you how many hours I've spent in the past trying to fix some old crappy wiring. The new ones just plug into the motors and then into the panel harness. Clean.
Here are some of the panel. I did Livorsi Monsters, blue super rim with platinum faces. Throttles with duel trim and yes, I left the thottles where Reggie intended them to be! Don't mess with nature.
Here are some of the panel. I did Livorsi Monsters, blue super rim with platinum faces. Throttles with duel trim and yes, I left the thottles where Reggie intended them to be! Don't mess with nature.
11-06-2007 | 05:50 PM
#62
Thread Starter
Registered
Joined: Jan 2004
Posts: 3,255
Likes: 17
From: Bay Area, CA
We make up all our own dash's and guage combinations. You can EASILY fit Monster guages in a 29 panel. You will howver need a new panel as it's easier to start from scratch. Complete panels with guages and harness start at around $900. Give us a call or shoot me an email;
Fionn
Fionn
