Looking For a Motor
#1
Registered
Thread Starter
Join Date: Feb 2004
Location: Bremerton, WA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Looking For a Motor
Looking for new power for the Baja. In search of a 385-500 hp motor. 454/496/502/...
Anyone have a spare sitting around that you want to sell???
Or know somebody that has one they would like to sell?
Anyone have a spare sitting around that you want to sell???
Or know somebody that has one they would like to sell?
#2
Registered
What type of Budget?
Offshore performance specialties in Ft MYers does alot of repowers. They have some 496 + ho's. I was going to do the same to my 272(swap a 454 mpi for a 496) but really decided then I wanted a bigger boat. Give Donnie a call 239-489-0884.
I think a 496 is about 9-10K.
Offshore performance specialties in Ft MYers does alot of repowers. They have some 496 + ho's. I was going to do the same to my 272(swap a 454 mpi for a 496) but really decided then I wanted a bigger boat. Give Donnie a call 239-489-0884.
I think a 496 is about 9-10K.
#3
Registered
Thread Starter
Join Date: Feb 2004
Location: Bremerton, WA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
I met with Donnie on Friday and discussed different options. Prices have gone up. 496HO is about 13-14k now. He has a "Demo" motor. One of Mercurys less than 5 hour motors that they warranty just like a new motor, for a little less.
Just thought I would ask around, see if there were any other options out there.
I appreciate the info. Looks like I am on the right track.
Just thought I would ask around, see if there were any other options out there.
I appreciate the info. Looks like I am on the right track.
#4
chief fever
Platinum Member
Join Date: Nov 2005
Location: Naples Florida
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
502-600hp
p8,i have a Chief 502 mercruiser blower 1050 Holley,10 hrs. have dyno sheets,blower is mercs. version of the weind 177,fit under my hatch blower is low profile,motor is at Chief now in storage complete headersto carb.make me a offer!Bolt on your accessarie's and your set,i will have Tommy at Chief redyno tune the motor if you are interested,
Last edited by chief fever; 04-02-2007 at 04:53 PM.
#6
Registered
Thread Starter
Join Date: Feb 2004
Location: Bremerton, WA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Hey Craig,
I have the stock 454 MPI Magnum 385hp. It is seized up. Not sure of the total damage at this point. If it is terminal, I would like to upgrade on the HP on the next motor. If it is not terminal, I would like to upgrade the HP! lol
I have the stock 454 MPI Magnum 385hp. It is seized up. Not sure of the total damage at this point. If it is terminal, I would like to upgrade on the HP on the next motor. If it is not terminal, I would like to upgrade the HP! lol
#7
Platinum Member
Platinum Member
http://www.offshoreonlyclassifieds.c...o14433-en.html
Cougarman
Thread
Thread Starter
Forum
Replies
Last Post
Peconic
General Racing Discussion
24
06-07-2004 08:18 PM