Offshoreonly.com
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Attn. Byrdman:1500x1500HP (https://www.offshoreonly.com/forums/general-boating-discussion/102636-attn-byrdman-1500x1500hp.html)

JCPERF 05-07-2005 12:16 PM
Attn. Byrdman:1500x1500HP
 
1 Attachment(s)
700 Cu in Injected.can make 1500HP and 1500 Ft. Lbs. :eek:with your PSI.It can make close to 1400x1400 with this blower

JCPERF 05-07-2005 12:21 PM
Re: Attn. Byrdman:1500x1500HP
 
2 Attachment(s)
Makes about 1150 on Pump.Notice the 2 starters :eek:

JCPERF 05-07-2005 12:26 PM
Re: Attn. Byrdman:1500x1500HP
 
1 Attachment(s)
Makes 1350 at 10 lbs.

Stormrider 05-07-2005 12:50 PM
Re: Attn. Byrdman:1500x1500HP
 
glad you got the pics and resized them.
Nice numbers... you got a dyno sheet?

Titan 05-07-2005 12:55 PM
Re: Attn. Byrdman:1500x1500HP
 
I saw that beast run on the dyno. That is going to be a bad ass. Even if it is in a Superboat?

outriggers 05-07-2005 01:06 PM
Re: Attn. Byrdman:1500x1500HP
 
It needs two starters to crank it? Doug

JCPERF 05-07-2005 01:11 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by outriggers
It needs two starters to crank it? Doug
Helps alot

SLINGSHOT 05-07-2005 01:20 PM
Re: Attn. Byrdman:1500x1500HP
 
whats the injection run $$$

JCPERF 05-07-2005 01:24 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by SLINGSHOT
whats the injection run $$$
When you are done,about $12,000 an engine.

SLINGSHOT 05-07-2005 01:33 PM
Re: Attn. Byrdman:1500x1500HP
 
nice piece.....do you work at richies?

JCPERF 05-07-2005 01:40 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by SLINGSHOT
nice piece.....do you work at richies?
Yes,I built your engines.Gray with the blue and purple accessories?May have been your brothers

Panther 05-07-2005 02:22 PM
Re: Attn. Byrdman:1500x1500HP
 
Jeff, was that the one you showed me? What about the other one with the PSI that was running when we got there?

JCPERF 05-07-2005 02:25 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by Panther
Jeff, was that the one you showed me? What about the other one with the PSI that was running when we got there?
The one under the sheet.Psi made a little under 1200HP

Panther 05-07-2005 02:51 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by JCPERF
The one under the sheet.Psi made a little under 1200HP
Nice! The smell of Cam 2 was definetely in the air!

I'll talk to you Monday.

SLINGSHOT 05-07-2005 02:51 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by JCPERF
Yes,I built your engines.Gray with the blue and purple accessories?May have been your brothers

i figured that was you.... :D

JCPERF 05-07-2005 04:58 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by sutphen30
who's efi computer is it?they look good,,which means you didn't do the wiring. :D :D
Motec, :D penis

masher44 05-07-2005 05:52 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by SLINGSHOT
nice piece.....do you work at richies?

Z found him on a garbage barge from Staten Island and he now sweeps the floors :evilb:

masher44 05-07-2005 05:54 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by JCPERF
700 Cu in Injected.can make 1500HP and 1500 Ft. Lbs. :eek:with your PSI.It can make close to 1400x1400 with this blower

Still not even close to TMP :evilb: :evilb:

masher44 05-07-2005 06:07 PM
Re: Attn. Byrdman:1500x1500HP
 
1 Attachment(s)
Originally Posted by Stormrider
glad you got the pics and resized them.
Nice numbers... you got a dyno sheet?

Here it is....

OldSchool 05-07-2005 06:52 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by masher44
Here it is....
LMAO!!!!!!! :evilb: :drink: :evilb: :drink: :D :D

You boys behave yourselves this evening, Nancy's band is playing and we are walking out the door in about 15 minutes.

JCPERF 05-07-2005 08:13 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by masher44
Here it is....
When i get photoshopITS ON :evilb:

masher44 05-07-2005 08:30 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by JCPERF
When i get photoshopITS ON :evilb:

Go out and buy it you tight wad

JCPERF 05-07-2005 08:34 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by sutphen30
maybe you should ask for a raise. :D :D btw,nice vise grips :evilb:
Works better than tape :evilb:

masher44 05-07-2005 08:37 PM
Re: Attn. Byrdman:1500x1500HP
 
1 Attachment(s)
At least we know how he holds the blower in place.... it IS an upgrade from the silver duct tape he was going to use :evilb: :evilb:

JCPERF 05-07-2005 08:39 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by masher44
At least we know how he holds the blower in place.... it IS an upgrade from the silver duct tape he was going to use :evilb: :evilb:
Notice the broom to the left so when the parts fly out.I figured one of you would have noticed that. :D

Nykamp 05-07-2005 09:51 PM
Re: Attn. Byrdman:1500x1500HP
 
VERY HAPPY with my ZULS in my 41 APACHE she ran great today in lake michigan. 653's are working good in ALLEZ VITE. THANKS, Steve.

offshoredrillin 05-07-2005 09:57 PM
Re: Attn. Byrdman:1500x1500HP
 
I didnt see any silicone hanging out or socks!!! What gives Jeffy, ya cheatin people out of footwear now??

JCPERF 05-08-2005 06:53 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by offshoredrillin
I didnt see any silicone hanging out or socks!!! What gives Jeffy, ya cheatin people out of footwear now??
:evilb: :evilb:

masher44 05-08-2005 09:33 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by JCPERF
:evilb: :evilb:
He used the socks to wipe the oil off the walls after the dyno :evilb:

Papache 05-08-2005 10:32 PM
Re: Attn. Byrdman:1500x1500HP
 
here's 733ci makes 1500 hp

Papache 05-08-2005 10:34 PM
Re: Attn. Byrdman:1500x1500HP
 
and my old 1250hp

JCPERF 05-09-2005 09:34 PM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by Papache
here's 733ci makes 1500 hp
Whos?

Papache 05-09-2005 09:36 PM
Re: Attn. Byrdman:1500x1500HP
 
The 1200s are randys

Strip Poker 388 05-10-2005 01:24 AM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by sutphen30
maybe you should ask for a raise. :D :D btw,nice vise grips :evilb:

Yall dont make fun of JC's tourqe wrench :drink:

ONESICKGLADIATOR 05-10-2005 06:03 AM
Re: Attn. Byrdman:1500x1500HP
 
2 Attachment(s)
Hey JC (Jeff)
Thanks You did a great job on my motor
It runs strong & idles fine for parking :evilb: :evilb:


I will see you later
Rick OSG

masher44 05-10-2005 11:27 AM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by ONESICKGLADIATOR
Hey JC (Jeff)
Thanks You did a great job on my motor
It runs strong & idles fine for parking :evilb: :evilb:


I will see you later
Rick OSG

Rick...WOW I see you had Jeff put on the Top Secret Invisible Spark Plug Wires..... you are tooooooo fancy :evilb: :evilb:

monstaaa 05-11-2005 06:55 AM
Re: Attn. Byrdman:1500x1500HP
 
Originally Posted by outriggers
It needs two starters to crank it? Doug

the boat this engine came out of has number six's with crash boxes, so to start it in gear became a real night mare.burnt many a starter. became much easier with 2 starters.

Byrdman 05-11-2005 08:58 PM
Re: Attn. Byrdman:1500x1500HP
 
Monstaa are they your motors?...I have many questions about them.

CBR 05-11-2005 10:13 PM
Re: Attn. Byrdman:1500x1500HP
 
Youse guys are killing me....(holding sides laughing)!

JCPERF 10-06-2005 10:16 PM
Re: Attn. Byrdman:1500x1500HP
 
The E-dock killers :cool:


All times are GMT -5. The time now is 12:03 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.