Offshoreonly.com - The Jersey Juice!!! Need some?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - The Jersey Juice!!! Need some? (https://www.offshoreonly.com/forums/general-boating-discussion/102969-jersey-juice-need-some.html)

The Jersey Juice!!! Need some?

Need more Juice??? (HP)

Check this out!

Superb Horsepower from Professional Marine

Engineered by the late Doug Lewis and Danny Alvarado

Utilizing a custom computer based EFI Fuel Management System built on a 653 cu in World Merlin block.

Bore 4.565
Stroke: 5 inches
Valve lift: .670
Lifters: .937
Rod Length: 7.600
Wrist Pins: 993
Pistons: Ceramic and Molly Coated JE Pistons
Cam: Lunati
Rods: Corillo
Crank: Bryant
Valve-train: Jesel
Trans: Huber 1550

The engines run off of 3 fuel pumps that keep feeding them 73 psi of fuel.
One pair are in a 36 Skater
At 67% throttle they have seen 143 mph @ 4900 RPMs
They ran 200 hrs before a need of a rebuild.

This has got to be one of the finest engines I have seen to date. I watched over the years as Doug and Danny worked at perfecting this awesome combination.
The nicest thing of all with these engines was shifting around at the docks. These engines will idle down to 500 RPM and you can shift with not having to worry of a stall. The engine's computer system some how is designed to adapt for the additional need of some torque when placed in gear. It's almost like the engine never misses a beat when it is shifted into gear. Truely amazing stuff!
I have a lot of pics as well as the Dyno sheet for this engine.
Check it out: