|
No.6 Spacers
Do they make a 1/4 or 1/2 inch spacer for a no.6 drive? Anyone know where to get a pair? I can only find 1" which is too big. Thank you
|
Re: No.6 Spacers
You might want to try bammarine.com . They are available in 1/2" increments from 1/2-3".
|
Re: No.6 Spacers
Mercury Part number for 1/2" "Six Drive Spacer Plate" is 846743A 1
but you better be sitting down, List price is $1046.45, it is available from Bam Marine for $867.67 |
Re: No.6 Spacers
[QUOTE=LubeJobs42]Do they make a 1/4 or 1/2 inch spacer for a no.6 drive? Anyone know where to get a pair? I can only find 1" which is too big. Thank you[/QUOTE
Sounds like your getting into the last part of getting your boat dialed in. See you at some poker run down the road. I just put shiftable crash boxes in FREEDOM US1 46 Skater. Now that your dealing with big power that might be the next thing on your shopping list. Have Fun!! |
Re: No.6 Spacers
Originally Posted by LubeJobs42
Do they make a 1/4 or 1/2 inch spacer for a no.6 drive? Anyone know where to get a pair? I can only find 1" which is too big. Thank you
|
Re: No.6 Spacers
Lube job,
I have a pair of half inch spacers with a half hour trial time. I'll trade for your 1 inch spacers call 781 831 5318 -walt |
Re: No.6 Spacers
[QUOTE=FREEDOM US1]
Originally Posted by LubeJobs42
Do they make a 1/4 or 1/2 inch spacer for a no.6 drive? Anyone know where to get a pair? I can only find 1" which is too big. Thank you[/QUOTE
Sounds like your getting into the last part of getting your boat dialed in. See you at some poker run down the road. I just put shiftable crash boxes in FREEDOM US1 46 Skater. Now that your dealing with big power that might be the next thing on your shopping list. Have Fun!! |
Re: No.6 Spacers
Originally Posted by TKO
Lube job,
I have a pair of half inch spacers with a half hour trial time. I'll trade for your 1 inch spacers call 781 831 5318 -walt |
Re: No.6 Spacers
Originally Posted by LubeJobs42
I would like to know more about the shiftable crash boxes. We have Bams transmission that have been working great. We also have a pair of B&M 2 speeds we were thinging about using but decided not to. We have been dialing it in for the last month. The acceleration is incredable. We think the drives might be a tiny bit high. We are still getting a lot of slip. We hit the rev limiters really quick. When we start trimming iit out and getting into the 140's the boat tends to hook to the right and the steering gets a little loose. We think the spacers will help and we just traded out 17" props for 16.5" diameter.
|
Re: No.6 Spacers
2 Attachment(s)
Originally Posted by LubeJobs42
I would like to know more about the shiftable crash boxes. We have Bams transmission that have been working great. We also have a pair of B&M 2 speeds we were thinging about using but decided not to. We have been dialing it in for the last month. The acceleration is incredable. We think the drives might be a tiny bit high. We are still getting a lot of slip. We hit the rev limiters really quick. When we start trimming iit out and getting into the 140's the boat tends to hook to the right and the steering gets a little loose. We think the spacers will help and we just traded out 17" props for 16.5" diameter.
|
| All times are GMT -5. The time now is 09:39 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.