Prop and Shaft compatibility
#11
VIP Member
VIP Member
Re: Prop and Shaft compatibility
Originally Posted by Sydwayz
OK OK OK, I see how it all works. I have never had to deal with all this. They all looked fused together to me at first glance.
I have the XR hubs which are still fine and dandy from my old props. I will knock out the pressed in small shaft hubs in the morning (don't want to wake the neighbors now) and insert the XR/XZ hubs.
Thanks everyone. I have always just left whatever props on the boat, on the boat. Never had to worry about prop testing and swapping and destroying one.
I have the XR hubs which are still fine and dandy from my old props. I will knock out the pressed in small shaft hubs in the morning (don't want to wake the neighbors now) and insert the XR/XZ hubs.
Thanks everyone. I have always just left whatever props on the boat, on the boat. Never had to worry about prop testing and swapping and destroying one.
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
Thread
Thread Starter
Forum
Replies
Last Post
MIKEHTMSR24
General Boating Discussion
3
07-22-2002 03:18 PM