Re: 300X Sportmaster Lower
 

We will be spectators for the Poker Run.
Whats this I here you are working Saturday?

Havent dug into the cracking issue yet. Your talking about the mid-section not the lower though arent you. Ive seen and heard the midsection do crack and its not a huge deal if welded, not sure if this problem carried over to the 300x's though.

Re: 300X Sportmaster Lower
 

just above where housing bulges and the prop shaft is under the cavatation plate...

Re: 300X Sportmaster Lower
 

Bernie yours is the lower. Mid section crack was on Daves 36 Skater the mid motor mid section was leaking oil out of the crack in the mid on his 300x

Re: 300X Sportmaster Lower
 

I have cracked a lower just in front of the forward gear and 4 carrier bearings on the RH case only but never a midsection

Re: 300X Sportmaster Lower
 

This is the first Ive heard of the lowers cracking.
Mid sections could probably be welded in most cases, the lowers however I wouldnt think you could. The tolerances have to be very tight.
Are you guys talking about welding the lowers?