Offshoreonly.com - Intercoolers for 1471 blower motors- Worth the money?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Intercoolers for 1471 blower motors- Worth the money? (https://www.offshoreonly.com/forums/general-boating-discussion/106380-intercoolers-1471-blower-motors-worth-money.html)

RunninHotRacing163.1

02-01-2009 11:03 AM

Quote:

Originally Posted by mike tkach (Post 2790491)

any time you compress air,you also heat it,even with a psi,the psi by design makes less heat,but still will benefit from cooling the air charge.:evilb:

U do realize this thread is from 2005 , and who knows if Dar is even still around :eek:

KNOT-RIGHT

02-01-2009 12:20 PM

Wipe the dust off this thread!

Whipple MOAC is the Whos your Daddy of coolers.

GLH	02-03-2009 11:15 AM

Quote:

Originally Posted by RunninHotRacing158 (Post 2790495)

U do realize this thread is from 2005 , and who knows if Dar is even still around :eek:

I hope the laws of physics have not changed in the last 4 years!!! :eek: :drink:

silverskater40

02-03-2009 02:18 PM

Quote:

Originally Posted by RunninHotRacing158 (Post 2790495)

U do realize this thread is from 2005 , and who knows if Dar is even still around :eek:

I think he is still around. He does have intercoolers on his monster motors

davidkristel

04-21-2013 11:19 PM

i just bought a blowershop 1471 for my boat i have bigblock 572 just wonderin if i really need to dyno or just put the blower with 5 psi

wannabe

04-22-2013 05:14 PM

Quote:

Originally Posted by davidkristel (Post 3910312)

i just bought a blowershop 1471 for my boat i have bigblock 572 just wonderin if i really need to dyno or just put the blower with 5 psi

OMG yes. You need to tune the engine for the blower. You will have to rejet the carbs. Otherwise you might melt a piston. Dyno tuning is needed to get it close.

Wannabe

mike tkach

04-22-2013 07:52 PM

dyno tuning is a good tool but a good air/fuel meter works really good.on every engine for marine i have dyno,d,needed to be retuned in the boat with a a/f ratio meter.

All times are GMT -5. The time now is 07:50 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page