Pure Energy

Aside from bottom paint removal, it does a lot of surfaces. I'm looking for a new business and interested to hear anything about it. Thanks

Tantrum

There is a guy on the river that started a business this year, I dont know anything about it. Interested to here what others have to say.

Shane

Never heard of it. What is it?

GOFSTCAT

works well for boats with painted bottoms that will stay painted but Lott's of work to make it smooth . respray gel , wet sand,compound, then buff. i blasted the running gear on a 116 ft yacht with kamma drives, the unit i was using had a huge portable air compressor and was a work out using also the soda dries out your skin like sunburn

mtm

iTrader: (4)

At my old job i used to soda blast cylinders to remove ink and glue.
The cylinders blasted were ceramic coated

WARPARTY36

It is like sand blasting, but the blasting media is a commercial grade of baking soda. It takes a while, but it won't hurt internal parts because the soda dissolves. We use it on large diesel engines after we got a $30,000 rebuild bill from getting sand in an engine It is good for engines and outdrives, I've never thought of using on a hull. It is not cheap though. The soda is about $60 a bag, plus the equipment.

Roger 1

It works good on Corvettes as well. It will remove the paint without harming the glass.