Hydraulic steering cylinder question
08-09-2005 | 05:33 PM
#1
Thread Starter
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Hydraulic steering cylinder question
I recently had a hydraulic steering cylinder rebuilt for my Cig TG.
Has anybody ever had one rebuilt?
Approximate cost?
What does a new one cost?
Has anybody ever had one rebuilt?
Approximate cost?
What does a new one cost?
Last edited by expresscat39; 08-09-2005 at 05:41 PM.
08-09-2005 | 07:14 PM
#2
Registered
Joined: Jan 2001
Posts: 3,140
Likes: 0
From: Holland MI
Re: Hydraulic steering cylinder question
I wouldn't think it would be a huge investment as there aren't a lot of parts to replace, assuming the cylinder barrel and the rod are usable. I've never done a steering cylinder but I've done plenty of hydraulic cylinders over the years, mostly on vintage aircraft.
Was it bypassing internally or leaking to the outside?
Dave R
Was it bypassing internally or leaking to the outside?
Dave R
08-09-2005 | 08:30 PM
#4
JC Performance Engines
Joined: Jul 2002
Posts: 8,904
Likes: 33
From: Long Island, NY
Re: Hydraulic steering cylinder question
I bent my steering ram a few weeks back.
Marine Machine had it back to me in 2 days, and im in NY.
Cost: $250. New piston and rebuild.
I think just a rebuild is 100-150.
Marine Machine had it back to me in 2 days, and im in NY.
Cost: $250. New piston and rebuild.
I think just a rebuild is 100-150.
Thread
Thread Starter
Forum
Replies
Last Post
onesickpantera
General Boating Discussion
6
06-01-2005 03:10 AM
