Avanti 33
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: Harrisburg, PA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Avanti 33
Anybody have any experience with an Avanti 33? How fast w/ HP500 carbs? Pro's and Con's? Build Quality/rigging/workmanship? Rough water capability/ handling?
Thanks in Advance!
Thanks in Advance!
#2
Re: Avanti 33
From the posts I have read here on OSO about Avanti, i would be careful. There were alot of negative things in the posts. Do a search like Trick said and you will see.
#3
Banned
Join Date: Mar 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Avanti 33
Avanti power boats were built in Miami in the mid to late 80's, the company was owned by Raul Rodriguez nickname (budi) They made a 33 center console or a 33 race pleasure deck both boats were made mostley with triple outboards. They were heavy boats with large fuel. I grew up with Raul in the late 70's but lost track of him in the late 80's. He knows how to build a boat that will get from point A to B even if the water would keep the average boat on the trailer.
#4
Registered
Re: Avanti 33
http://www.avantipowerboats.com/
there made in Palmyra NJ. i owned a 22ft'r with a 454 mag and a bravo 1 and that boat handled fantastic for its size. had it in the Atlantic in some less then favorable conditions on numerous occasions, ran it up and down the Barnegat Bay. Heavy boat solid build...only down fall is re-sale since there not a lipstick boat ie...(Fountain, Baja, Spectre etc...) I almost purchased a 33 last year from a dealer in Toms River. Hull was intact needed a complete repower including drives but didnt need another project. The 33 is a wave crusher.
there made in Palmyra NJ. i owned a 22ft'r with a 454 mag and a bravo 1 and that boat handled fantastic for its size. had it in the Atlantic in some less then favorable conditions on numerous occasions, ran it up and down the Barnegat Bay. Heavy boat solid build...only down fall is re-sale since there not a lipstick boat ie...(Fountain, Baja, Spectre etc...) I almost purchased a 33 last year from a dealer in Toms River. Hull was intact needed a complete repower including drives but didnt need another project. The 33 is a wave crusher.
#5
Charter Member
Charter Member
Re: Avanti 33
The 33's a real good rough water boat. Built strong, rigging should be good if it has HP500's. Most complaints on this board are not with the boat but dealing with the owner. These boats have always been made in Palmyra. I have worked on many Avanti's. PM me with any questions I'll
be glad to help if I can.
be glad to help if I can.
#6
Registered
Re: Avanti 33
There're two Avanti's...NJ & FL
NJ is all sport-boats(33' based on Coyote...I think)
Fl. has been mostly Center Console recently. Haven't seen a late model sport-deck in a long while.
NJ is all sport-boats(33' based on Coyote...I think)
Fl. has been mostly Center Console recently. Haven't seen a late model sport-deck in a long while.
#8