![]() |
Re: 13" Mini-Hawk
very cool, boat is not in the water too much is it....... :D :D
|
Re: 13" Mini-Hawk
Originally Posted by stecz20
very cool, boat is not in the water too much is it....... :D :D
Now if you thought that video was cool, watch the rest of them: Sharkey's Bullet 130 Videos You won't believe your eyes. :eek: I still can't believe it myself..... :D |
Re: 13" Mini-Hawk
Originally Posted by sharkeymarine
You won't believe your eyes. :eek:
I still can't believe it myself..... :D |
Re: 13" Mini-Hawk
Originally Posted by NJgr8ful
:eek: :eek: Maniac :D :D Nice vid (Bullet 190 1st time out) .. what did they take that with an ole 8mm?? :cool: or was VHS out by then?
It was a hand held camera with a portable vcr recorder attached via a cable. I was lucky any of those vids still had any picture left in them.... :eek: |
Re: 13" Mini-Hawk
3 Attachment(s)
Stecz,
This is what you have under the floor. 3 separated compartments. Bottom is built with Vinyl Ester resin, 1/2 Balsa Core and Bi-Directional 1708 glass. |
Re: 13" Mini-Hawk
3 Attachment(s)
Transom area.
|
Re: 13" Mini-Hawk
2 Attachment(s)
Behind the dash....before the last owner had to modify it for the Yamaha key switch I guess....
|
Re: 13" Mini-Hawk
very nice.... im gonna bring it up to the marina this week and clean her up... ill take some pics... do i have the 46 skater of mini boats, i think i do..... :evilb: :evilb: :evilb:
|
Re: 13" Mini-Hawk
Other than the vacuum bagging.....yes! :drink:
You will find two drain plugs on each side of the bilge. You can open them to check for any water. I wouldn't think you would find any but put the plugs back in and tighten them. They should keep the areas under the floor on the outside of the stringers air tight. |
Re: 13" Mini-Hawk
1 Attachment(s)
I wasn't crazy about the windshield someone put on that boat.
Maybe consider changing it to an all fiberglass one like I had on my 1st Bullet: |
| All times are GMT -5. The time now is 03:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.