Water Test - Titan
#22
Registered

Joined: Oct 2000
Posts: 3,045
Likes: 3
From: N. NJ, Eastern LI
Nice to hear you got your bottom wet!! Good luck this weekend. Aside from part delays, brain farts, a blown out knee, and an upstate commitment this weekend, my project won't be done till next week.
I'll be looking for your results when I get home Sun. night!!
I'll be looking for your results when I get home Sun. night!!
#24
Don, just ran the prop slip calc... its seems your at 9% the way you were running last night.
If you can run that prop at 5700 you should see over 100.
If you gotta drop 1 size smaller prop could be close.
But 1st you gotta trim the boat.
If you can run that prop at 5700 you should see over 100.
If you gotta drop 1 size smaller prop could be close.
But 1st you gotta trim the boat.
#28
Originally Posted by drypipetiger
with any luck these babies will have the cob webbs outa them by spring.... 

Yo bro they look sweet I even see some JC Perf suggested performance upgrades on those mills to. Be Careful Stecz may scoop you up next and corrupt you into the Clan!!!!
Don
Last edited by Titan; 11-06-2005 at 12:02 AM.
#30
Thanks Bro for the compliment but unfortunatly I was at work swamped all day. But It was my boat. They were testing it in the Bay this afternoon. Will probably be out on Saturday afternoon with Jeff if all goes well..



