Andy Buzz

Had my motors built by Mesa Balancing. Have not had a chance to do actual in water test yet but can say that he was great to deal with thru the entire purchase/build phase. Laz is probably one of the nicest people in the marine business. His prices were very fair and his attention to detail has been very good.

Next week, I should be ready to splash. Everyone that has seen and heard my new motors has given compliments.

Check out www.mesabalancing.com or call Laz in Miami to arrange to see his work. I would not hesitate to recommend.

DTFaber

If your sincerely looking for a true 750 HP N/A combination that is durable as hell and you can thrash on, you'd do yourself a favor contacting Dean Gellner of Gellner Engineering, Inc. of Cleveland, Ohio 216.398.8500. A more precision engineered mill, blueprinted and balanced you can't find. Keep in mind there's an extraordinary difference between an engine builder and engine assembler! Unfortunately, there are more of the latter with big budgets to lure your business. Give Dean a call and educate yourself and I'm confident he'll earn your both your confidence and your business!

pullmytrigger

Has anybody heard of Dale Francis in Cleveland?????

DTFaber

Regarding who's raced Gellner mills. I posed the question directly to Dean Gellner and below is brief list.

B class: Feel The Rush (B-15)32'Signature 98 MPH
: Let It Roll (B-69) The "Original"
Powerboat Magazine Larry Smith Scarab Kevlar 38'107 MPH with single 1X4 carb 510cu.in 9.5:1 comp. wetsump engines

A class: RumRunners (A-22) 26' Larry Smith Scarab
single engine 96 MPH
: Anythings Possible (A-19)

Super V: CGS Ferocious 40' Velocity with 1100 SC
118 MPH

Performance 1: Traffic Light Racing 38' Talon cat running twin 12.0:1 single 4 barrel engines

Modified class: SuperCharger Systems Inc.
38'Pantera 1200 SC

Gellner Engineering has clinched many Great Lakes Silver Cup Series Championships along with top National Event wins over the years.

Poker Run Circuit includes: "Just Truckin'"
42'OuterLimts GTX (former Fiore boat) Scott Applegate N.J. 1250 SC 140 MPH
: "Let's Rock" 37'OuterLimts Brian Pariasue CA.119MPH 975 SC
: "Wild Child" 37'OuterLimits Tom Healey N.J. 725 HP
1X4 carb. 102 MPH
: "It's Good To Be King" 46'Cigarette Rough Rider
115 MPH when Kevin King owned.
: " No Limits" 43' Nortech V 1300SC 120 MPH with full cabin Fred Cerny
: "Fat Boy" 38'Cigarette Top Gun 100+ Mitch Rudolph feature boat Extreme Boats Magazine vol.2 issue 4
:"She's No Angel" 40' Hustler Fiore Triple 650 N/A
1X4 carb David & Jeanie Faber
and many others to numerous to mention.

I'm certain Dean will earn your trust! Call Dean and spend some time asking him some straight forward questions directly yourself and get a quote for your iron - 216.398.8500. Dean's never too busy to spend time educating his client's; his mobile should you need it is 440.476.3558.

Lastly, I've never met a customer of Dean's who hasn't become friend in the process of dealing with Dean - that happens because Dean delivers on what he promises and his craftsmanship is as durable as you could ever hope to find!

customryder

been great working with him...(Dean) you guys should give him a call.(after my engines are finished)

TeamSaris

Saris. www.perfmar.com

Raylar

Not claiming to be the best, but definitly a contender?
Our new HO725 is a nice part at an affordable cost.
Kind of looks good to!!

Ray @ Raylar

TeamSaris

Nice!

mike11

We can offer you what ever you are looking for in N/A power. Engines producing 750-850+ HP on pump gas with hydraulic valve trains. Contact us.. Thanks Mike

Roccard Marine Engines
www.roccardmarineengines.com
[email protected]
570-956-2840

Titan

How did she run Craig?