Offshoreonly.com - Dragon Power Boats

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Dragon Power Boats (https://www.offshoreonly.com/forums/general-boating-discussion/116774-dragon-power-boats.html)

Re: Dragon Power Boats

Tres posted this pix when he was dialing it in 97.5 pretty impressive for 525s what props were this with?

Re: Dragon Power Boats

Quote:

Originally Posted by CIG3

Scott Smith And Craig Barrie are stand up guys who have been in the business for many years. Yes, the glass work is done outside by the same shop that built all the tooling. Once the hull is joined it is sent to the Dragon shop where it is rigged by Pete and then painted by Davis Hunter. The interior is then assembled. All under the eye of Scott and Craig. Dragon is responsible for their suppliers as is any boat company. They stand behind everything they do from start to finish. If you guys have questions e-mail them and they will get back to you in 24 hours or less.

I saw all three boats they made they are at Randy shop (fast boats) when I was they last week they just move there.I heard that they are not working with tres any more

Rick OSG

Re: Dragon Power Boats

Quote:

Originally Posted by customryder

Tres posted this pix when he was dialing it in 97.5 pretty impressive for 525s what props were this with?

six blade hering that could barely get on plain... runs 93 setup right( per craig)

Re: Dragon Power Boats

Eric is very happy with the boat, He and Craig are just fine tunning it