Inside Hydra Powerboats
12-15-2005 | 10:24 PM
#51
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
1r
12-15-2005 | 10:25 PM
#52
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
1s
12-15-2005 | 10:27 PM
#53
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
Benihana
12-15-2005 | 10:30 PM
#54
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
The Roger Mund "Spirit" molds were used to build an A-Class race boat named "Aqua-Holic"
I collaborated on the build of this boat as well.
I collaborated on the build of this boat as well.
12-15-2005 | 10:31 PM
#55
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
1t
12-15-2005 | 10:32 PM
#56
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
1u
12-15-2005 | 10:33 PM
#57
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
1v
12-15-2005 | 10:34 PM
#58
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
1w
Last edited by SHARKEY-IMAGES; 12-15-2005 at 10:37 PM.
12-15-2005 | 10:42 PM
#59
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
Some things on the drawing board for Hydra:
12-15-2005 | 10:50 PM
#60
Thread Starter
OSO Content Provider
Joined: Jun 2001
Posts: 19,757
Likes: 112
From: Sharkey-Images.com
Re: Inside Hydra Powerboats
It may have been Thrill....
Here is the mold for the 27 footer. Notice the transom is a bolt-on and the mold is a split mold so they can keep their options open in the future.
Here is the mold for the 27 footer. Notice the transom is a bolt-on and the mold is a split mold so they can keep their options open in the future.
