Like Tree0Likes

Bluewater trim indicator

Reply
Old 01-19-2006, 04:37 PM
  #1
Registered
Thread Starter
 
Join Date: Sep 2001
Location: Atlanta,GA
My Boats: 30' Shadow Cat
Posts: 406
Default Bluewater trim indicator

I have a Bluewater Trim indicator and need to change the inside from black to white.oes anybody know where I can buy just the indicator card.
Mark
fishead is offline  
Reply With Quote
Old 01-19-2006, 04:40 PM
  #2
Registered
Thread Starter
 
Join Date: Sep 2001
Location: Atlanta,GA
My Boats: 30' Shadow Cat
Posts: 406
Default Re: Bluewater trim indicator

This is it
Attached Thumbnails
Bluewater trim indicator-cockpit2-2-.jpg  
fishead is offline  
Reply With Quote
Old 01-19-2006, 06:10 PM
  #3
(aka) Pure Adrenaline
Platinum Member
 
Doug's Avatar
 
Join Date: Oct 2000
Location: Marion, IN, USA
My Boats: 90 MPH Top Gun, Full Stagger, 580cid Donovans
Posts: 808
Default Re: Bluewater trim indicator

Mine was Bluewater in my Mistress and black. I went to the local shop that does engraving and makes trophies. I did it in white and when they cut the numbers they were red to match my gages. The material you have might be a little thicker than what they use but they should be able to order it. Give them the old one and they can match it in any color. I also went to the local glass shop to replace the clear plexiglas. If you need any help let me know. Doug
Doug is offline  
Reply With Quote
Old 01-19-2006, 10:45 PM
  #4
Charter Member
Charter Member
 
rbtnt's Avatar
 
Join Date: Oct 2000
Location: Central, Ohio USA
My Boats: 2001 28 Eliminator Daytona
Posts: 1,074
Default Re: Bluewater trim indicator

I worked with Bluewater on custom indicators. Here a link to their site.

http://www.bluewater-1.com/index.html
__________________
www.mtboats.com - Pages of boat related links
rbtnt is offline  
Reply With Quote
Old 01-20-2006, 05:05 PM
  #5
Registered
Thread Starter
 
Join Date: Sep 2001
Location: Atlanta,GA
My Boats: 30' Shadow Cat
Posts: 406
Default Re: Bluewater trim indicator

Called Bluewater and they wanted 90 dollars just for the insert.Hey Doug who did yours and what did it cost I may send it up there.
Mark
fishead is offline  
Reply With Quote
Old 01-20-2006, 05:33 PM
  #6
(aka) Pure Adrenaline
Platinum Member
 
Doug's Avatar
 
Join Date: Oct 2000
Location: Marion, IN, USA
My Boats: 90 MPH Top Gun, Full Stagger, 580cid Donovans
Posts: 808
Default Re: Bluewater trim indicator

The store is called Two Brother Engraving, Marion Indiana. It's been about 3 years so I don't remember the price. I'm sure not over $20. I think the plexiglas might have been $5. I drive past it everyday, Monday I will stop in and show them my old one and ask how much. Mine was 4 slot and you only need 2. You wanted white, what color do you want the numbers ? probably black ? Be glad to help out.

When you take that apart be careful because there are tiny springs behind the position indicators. Very simple to change over.
Doug is offline  
Reply With Quote
Old 01-20-2006, 07:24 PM
  #7
Registered
Thread Starter
 
Join Date: Sep 2001
Location: Atlanta,GA
My Boats: 30' Shadow Cat
Posts: 406
Default Re: Bluewater trim indicator

If you could find out I would appreciate it and I can call them and send up the old one.My bezels are red so I would probably go with red.Mine came apart real easy.I did not have to take it totally apart.Mine is only 2 slots and I didnt even have to remove the cables.Probably a difference between the two and four.My cell is 678-522-4873.
Thanks
Mark
fishead is offline  
Reply With Quote
Old 01-20-2006, 09:00 PM
  #8
Registered
 
Harper220's Avatar
 
Join Date: Jun 2003
Location: Omaha~LOTO
My Boats: 2001 28 TD Daytona
Posts: 1,496
Default Re: Bluewater trim indicator

I don't know if it's their website, but those indicators look dated.
Harper220 is offline  
Reply With Quote
Old 01-23-2006, 05:28 PM
  #9
(aka) Pure Adrenaline
Platinum Member
 
Doug's Avatar
 
Join Date: Oct 2000
Location: Marion, IN, USA
My Boats: 90 MPH Top Gun, Full Stagger, 580cid Donovans
Posts: 808
Default Re: Bluewater trim indicator

Ha Mark, I checked on that today and she said she can do it no problem. I took my old one in so she would remember it. Not sure if any material was left from doing mine but she will check when yours comes in to make sure it's the same thickness and can call you with a price. Here is the info, if you want me to check on it when it's finished I can or if you have any problems let me know. Doug 765-506-0672


Two Brothers Engraving
326 S. Washington St.
Marion, Indiana 46952
Att. Lynn Allen

1-866-896-2767
Doug is offline  
Reply With Quote
Old 01-24-2006, 01:40 AM
  #10
Registered
Thread Starter
 
Join Date: Sep 2001
Location: Atlanta,GA
My Boats: 30' Shadow Cat
Posts: 406
Default Re: Bluewater trim indicator

Doug thanks for the help.I was driving around town were I live and saw the local Trophy shop and I walked in and they can do it for 30 bucks.Sorry to put you through the trouble and thanks again.Mark
fishead is offline  
Reply With Quote
Reply

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mikesonic
General Boating Discussion
0
06-28-2006 01:20 PM
ratman
General Boating Discussion
3
04-05-2006 12:03 PM
RUSSSR1
Formula
2
05-16-2003 09:30 AM
patrick22309
General Q & A
4
05-20-2002 09:52 AM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 03:41 AM.


Copyright 2011 OffShoreOnly. All rights reserved.