375stinger

okis...i just need a simple straight forward response for this question...will raising the x dimension lower the bow lift?thank you

Griff

maybe

If the X is real deep, then probably not.

stecz20

you will get some better answers in the tech section... thats where the smart guys hang....

PatriYacht

That's what the trim switch is for.

cuda

Well, yes and no.

cuda

Is that why we never see you in there????

375stinger

well if the drives are too low...

birdog

That would be why I'm here..............

There is no..Yes or No...It depends. deeper,spinning in should carry the bow more...Maybe
Now throw props into the equation also.....

Ted G

iTrader: (1)

All other things being equal raising the x will cause the bow to drop. If the drive is higher it exerts less leverage and drops the bow. Some boats get extensions at the same time to bring some of the leverage back. But if you just move the prop up (like an outboard with a jack plate) it will drop the bow at the same trim position.

WildWarrior

Raising the drive height from stock Bravo X on your style hull will lower your bow, and if she porpoises now even a little bit ,she will be like flippers older brother with less X and also net way slower speeds.