My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
#102
Geronimo36
Gold Member
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by ReggieRaft
Did you need to modify the transom? Does it use existing holes?
If you leave it the same you're going to loose some steering radius.
The following users liked this post:
liltwomatt (07-03-2023)
#104
Registered
Platinum Member
Join Date: Nov 2003
Location: Oakland N.J.
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by Panther
The only thing I had to do was change gimbal bearings over to the XR style bearing, then set up the steering because it uses a different wing plate. You can either get longer steering rams, re-position the rams on the back of the boat, shim the rams out or leave it the same.
If you leave it the same you're going to loose some steering radius.
If you leave it the same you're going to loose some steering radius.
#105
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by ReggieRaft
Did you install them yourself or work with a pro shop?
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#106
Geronimo36
Gold Member
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by ReggieRaft
Did you install them yourself or work with a pro shop?
#107
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by Strip Poker 388
So far. I just sent The B-Maxs back to Dean at the Bravo Shop . I am getting him to ck them out and I am trying to change to his new style foot maybe that will help some , Cant hurt
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#108
Platinum Member
Platinum Member
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by Strip Poker 388
And I am still waiting
#109
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Originally Posted by Jassman
My offer still stands. I'll go pick them up for you when I pick the Nortech up. Get on Deans AZZ to finish up. It will save Dean a shipping chargeas well, and they should fit nicely in my 8' bed. Later Jeff
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#110
Re: My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP
Well I now have all the dyno sheets & Video from when we dynoed at Precision Marine .We ran it up to 11.5 pounds of boost That Whipple is whining at 11.5!!
I am going to start a new thread and post all the sheets and info
Rob
I am going to start a new thread and post all the sheets and info
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.