Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Konrad conversion updates? (https://www.offshoreonly.com/forums/general-boating-discussion/129006-konrad-conversion-updates.html)

Audiofn 05-04-2006 05:18 PM

Re: Konrad conversion updates?
 
Do your toes match all your customers motors? :drink: :drink:

Doller Offshore 05-05-2006 11:30 AM

Re: Konrad conversion updates?
 
1 Attachment(s)

Originally Posted by Audiofn
Do your toes match all your customers motors? :drink: :drink:

Well, I try..Will have to get Purple/Yellow this weekend to match to outside of the boat!
Anyway, Exhaust going in today...

NJSONIC 05-08-2006 08:44 PM

Re: Konrad conversion updates?
 
Was told sea trial later this week :D .

NJSONIC 05-16-2006 07:22 PM

Re: Konrad conversion updates?
 
Doller Offshore took her for her maiden run this afternoon-Got up on plane much easier, held close to the same speed and rpm for her cruising speed. They can't run flat out until the break in period is over.They will retest again later this week when it stops raining.

Payton 05-16-2006 08:58 PM

Re: Konrad conversion updates?
 
Cool :cool: They look great.
I'm not aying if I am talking about the drives or the toe nails. :p :D

NJSONIC 05-16-2006 09:09 PM

Re: Konrad conversion updates?
 
2 Attachment(s)
Here's a before photo.

Doller Offshore 05-17-2006 07:51 AM

Re: Konrad conversion updates?
 
1 Attachment(s)
OK, now I have the official water testing toes, purple to match the boat!

Audiofn 05-17-2006 08:00 AM

Re: Konrad conversion updates?
 
Damn that is almost a perfect match!!! Did ya take a picture of the boat with you to the store and ask "Hey I need some nail polish like this", or did you have the paint shop mix that up custom :drink:

Audiofn 05-17-2006 08:02 AM

Re: Konrad conversion updates?
 
Is the break in on the motors or drives? Hope your luck is as good as everyone else that has made this swap over.

Jon

Doller Offshore 05-17-2006 08:13 AM

Re: Konrad conversion updates?
 
Hey Jon, break in time on the Drives....Konrad has a protocol to follow.


All times are GMT -5. The time now is 02:28 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.