Call me an idiot!
05-03-2006 | 09:36 PM
#1
Thread Starter
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Call me an idiot!
Last yr I installed a fool proof way to run the motors on the hose w/o screwing around with muffs. You know the system, a tee in the supply hose hooked to a garden hose adapter located by each motor. VERY SIMPLE, even a beginner can operate it and not burn up an impellor. With twin motors, you have 2 of these hose adapters. So I hook it up to the one I want to run, turn on the hose, verify water coming out the drive, then start the motor. 30 sec later the wife says it's still coming out the drive. WHAT?
Had a 50/50 chance of starting the correct motor.
I failed.
Had a 50/50 chance of starting the correct motor.
I failed.
05-03-2006 | 09:38 PM
#3
Registered
Joined: Jul 2004
Posts: 8,908
Likes: 9
From: Long Island,New York
Re: Call me an idiot!
Originally Posted by US1 Fountain
Last yr I installed a fool proof way to run the motors on the hose w/o screwing around with muffs. You know the system, a tee in the supply hose hooked to a garden hose adapter located by each motor. VERY SIMPLE, even a beginner can operate it and not burn up an impellor. With twin motors, you have 2 of these hose adapters. So I hook it up to the one I want to run, turn on the hose, verify water coming out the drive, then start the motor. 30 sec later the wife says it's still coming out the drive. WHAT?
Had a 50/50 chance of starting the correct motor.
I failed.
Had a 50/50 chance of starting the correct motor.
I failed.
i labeled mine...im putting the run dry kpms on mine right now. hint
