Re: Any GM CRATE MOTOR sellers on the board?
 

as far as cam goes I did not ask for specification but I will. I just trusted this guys he actually did like a dozen engines this year for me and always runs perfect. That's why I did not ask questions. Same for pistons, compression. All I know is I get a new intake called a Victor Jr. Heads needed welding because they were cracked, but it's all new parts in there, ssteel inconel valves, new springs locks, lifter, push rod, timing chain, pistons, rods,so on and so on. And also a braided fuel line with a fuel pressure gauge in it.To make sure I don't melt the engines... But I'll come back later when I have more specification.

Re: Any GM CRATE MOTOR sellers on the board?
 

By the way, I was surprised but finally it is a flat tapped cam...

Re: Any GM CRATE MOTOR sellers on the board?
 

Just to throw this in the pot .... I have 2 502 MPI MAGS ..that have been freshened ( or in the process) ... we also added 500 EFI cams and Crane Gold Roller Rockers ....Also new forged pistons ... Also the ECM will be upgraded .... These are complete drop in motors ( no Exhaust) ....

Dean has first right to these motors if he still wants them .. I had hoped everything would be done by Sept 1 but it hasnt happened ... We did fire up the #1 motor last Friday and sounds pretty bad with the 500 cam ...maybe #2 complete by Oct ......8250.00 each .... If you need more info .... [email protected] ..............mike bell jax fla

Re: Any GM CRATE MOTOR sellers on the board?
 

Hey! Here is the link!
http://www.gmgoodwrench.com/
Once the homepage appears, go in the third column, and click on the gold letters GM PERFORMANCE PARTS. From there you can surf different subject.

Re: Any GM CRATE MOTOR sellers on the board?
 

I would be interested in knowing whos cam and part number. I have been informed that 420hp is about it for these engines so that is why I am keen on knowing what the internals are.

Re: Any GM CRATE MOTOR sellers on the board?
 

Information for you zz572 fans...

http://www.offshoreonly.com/forums/s....php?p=1371715

http://www.offshoreonly.com/forums/s...d.php?t=106361