hear more - new staggered 35 Fountain
#21
Registered
Join Date: May 2003
Location: horseheads, ny
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: hear more - new staggered 35 Fountain
I think you would loose to much bit running one drive your slip would be to high for the size and weight of the boat, you could run that imco drive splitter with two drives and one big 1100hp motor that might work well
#22
Registered
Thread Starter
Join Date: Jun 2002
Location: Seneca Lake
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Re: hear more - new staggered 35 Fountain
Originally Posted by sd11856g
Gary you need one damn big cabin so you have some place to put all your light bulbs!!!!!!!!!!!!!! buy that red 35 and we will cut the cockpit down move the rear bulkhead forward re-glass the transom and install 2 aluminum small blocks in it staggered about 750hp each
Hey Scott !!
I've considered that small block idea - couple of aluminum small blocks with 15:1 compression running on alcohol and puttin out about 800 hp at 8400 rpm like the old sprint days might get her over the 130 mark OK - lets do it - fire up that grinder !!!!!!
PS - I ran out of light bulbs last night - got any ??
#23
Registered
Re: hear more - new staggered 35 Fountain
Magazine test of Nordic 35 with single 1200 and IMCO splitter went 109 mph if I remember correctly. Same boat with a pair of 600s would go??
I like the splitter idea, keep the cockpit the same, easier to work on the engine. Less drive headaches. Two bravos and a splitter less $ than a #6?
I like the splitter idea, keep the cockpit the same, easier to work on the engine. Less drive headaches. Two bravos and a splitter less $ than a #6?
#24
Registered
Re: hear more - new staggered 35 Fountain
Originally Posted by cosmic12
and there in lies the difference between a Fountian owner and a non Fountian owner. I use my cabin every week end.
#25
Registered
Join Date: Mar 2006
Location: 30,000 Islands Georgian Bay Ontario Canada
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: hear more - new staggered 35 Fountain
Originally Posted by 9 Lives
525 + 525 = 1050
Hmmm........Now I'm thinkin'..........
Would a single 1050-1100 hp run the same? Weight would be less.
I remember Velocity put a single Torque Engineering V-12 in their 41 years ago will respectable results.
Has anyone else ever tried a big HP single in a 35 ft or over V-bottom?
Hmmm........Now I'm thinkin'..........
Would a single 1050-1100 hp run the same? Weight would be less.
I remember Velocity put a single Torque Engineering V-12 in their 41 years ago will respectable results.
Has anyone else ever tried a big HP single in a 35 ft or over V-bottom?
Thread
Thread Starter
Forum
Replies
Last Post
Kirkc
General Boating Discussion
2
01-29-2005 03:33 PM