Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   1980 Carrera SS7M (https://www.offshoreonly.com/forums/general-boating-discussion/145788-1980-carrera-ss7m.html)

chriscarbone 11-25-2006 07:45 PM

Re: 1980 Carrera SS7M
 
Wat A Great Ruff And Flat Water Boat, Been RAcing Her For 3 years And Running Her Hard Cant Tell Ya Anything Bad About It.
Chris Papa Dukes P6-13

motox4life99 11-25-2006 09:54 PM

Re: 1980 Carrera SS7M
 

Originally Posted by CanDo
You think he's kidding???

No.....but explain alittle more.

motox4life99 11-25-2006 09:55 PM

Re: 1980 Carrera SS7M
 

Originally Posted by chriscarbone
Wat A Great Ruff And Flat Water Boat, Been RAcing Her For 3 years And Running Her Hard Cant Tell Ya Anything Bad About It.
Chris Papa Dukes P6-13

:drink: Thanks for the info.

nocigarette 11-26-2006 06:57 AM

Re: 1980 Carrera SS7M
 

Originally Posted by CanDo
You think he's kidding???


i was low balling too...................

motox4life99 11-26-2006 09:04 AM

Re: 1980 Carrera SS7M
 

Originally Posted by nocigarette
i was low balling too...................

Are we talking the boat or the wife? :drink:

Biggus 11-26-2006 11:28 AM

Re: 1980 Carrera SS7M
 
Cool boat! There's one up here, been for sale for a while at 11k, has a 420/454/TRS.

As for what is worth the way it is, I'd say 4-5k You'll probably sink at least 6k just to make it a runner.

Kurt

CanDo 11-26-2006 05:02 PM

Re: 1980 Carrera SS7M
 
As chriscarbone said, its a great boat in any water. lots of potential as well. CanDo

motox4life99 11-26-2006 07:56 PM

Re: 1980 Carrera SS7M
 
Thanks for the replies Biggus and CanDo.

As far as getting it sea worthy, I am assuming the motor will need to come apart at the very least to check on condition and reseal. The out drive and trans are also unknown. The out drive is half buried in the dirt so I am assuming it will need to come apart again to check condition and reseal. The trans ???????? Again assuming it will need to come apart to check condition and reseal.
The motor would be no problem as I feel I am fairly mechanical (have a part time motor sports and small engine service and repair business) but I have never taken an out drive apart (yet, I have the alpha off my Wellcraft and need to reseal it this winter). I feel I can definitely do the out drive and trans with a manual but am unsure on special tools needed.
Any idea's or hints would be greatly appreciated. Also costs associated with doing everything mentioned above with me performing all or most of the labor.

wannabe 11-27-2006 02:27 PM

Re: 1980 Carrera SS7M
 
That's an "Alpha " Drive.

What that mean is $$$ when you try and put HP (also $$$) through that drive. :evilb:

You have a solid hull there, offer them $4000

Wannabe

motox4life99 11-27-2006 03:38 PM

Re: 1980 Carrera SS7M
 

Originally Posted by wannabe
That's an "Alpha " Drive.

Wannabe

Are you sure? I thought it was a TRS. Can someone else verify?


All times are GMT -5. The time now is 08:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.