Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Tyler Crockett Marine (https://www.offshoreonly.com/forums/general-boating-discussion/147453-tyler-crockett-marine.html)

KINGB 12-21-2006 01:28 PM

Re: Tyler Crockett Marine
 
Tyler tunned some motors for us one of them was a 540 with a M-4 Procharger it made 1100HP and 1200 torque. It runs great and it still running to this day and that was 3 or 4 years ago.

Bill Kingery

THEJOKER 12-21-2006 07:38 PM

Re: Tyler Crockett Marine
 
Nice to hear so many positive things about our ORL engine re-sealer and dyno guy. I'm looking forward to working w/ Tyler.

www.OffshoreRacingLeague.com

rackster 12-23-2006 10:25 AM

Re: Tyler Crockett Marine
 
Tyler is a great guy, as you have seen. He did the "turn key" motor for the 29 Fountain that I rigged. We had a few issues, mostly related to "bolt on" components, and Tyler made sure that all problems were resolved. He also flew to Virginia, to "tune" the engine in the boat. That made an enormous difference in the economy and operation of the engine. In addition he made some extra efforts to help Boost :evilb: some additional performance for a local radar shoot. Great guy.

docmanrich37 12-23-2006 10:36 AM

Re: Tyler Crockett Marine
 

Originally Posted by rackster
Tyler is a great guy, as you have seen. He did the "turn key" motor for the 29 Fountain that I rigged. We had a few issues, mostly related to "bolt on" components, and Tyler made sure that all problems were resolved. He also flew to Virginia, to "tune" the engine in the boat. That made an enormous difference in the economy and operation of the engine. In addition he made some extra efforts to help Boost :evilb: some additional performance for a local radar shoot. Great guy.

All he did was remove the stripper pole and Chris from it and it went 8 mph faster. :evilb:

TUFFboat 12-24-2006 08:11 AM

Re: Tyler Crockett Marine
 
I owe Tyler a BIG thank you from an incident a few years ago... we were at the ramp at a poker run in the thousand Islands. We had a big Skater with Mercs and a cross threaded spark plug hole. Tyler was on a day off relaxing when he came by. After seing our situation he crawled in the bilge cleaned out the thread with a tap and saved the day.

Note; not his motor and on holidays he got dirty for some guys he never met before.

I can only imagine how far he would go for a real customer.

If I wasn't clear that day Tyler, "Thank you".

Mark

SHARKEY-IMAGES 12-24-2006 08:28 AM

Re: Tyler Crockett Marine
 
If you want to read more about what Tyler has to say, pick up HOT MAGAZINE. He is a Technical Columnist for the mag.


Originally Posted by masher44
Does he build motors for Papa Dukes?

Yes Masher he has.
He had a killer motor in Destin for Dukes to run up against, but unfortunately his boat's bottom couldn't withstand the torture any longer.... :(

That would have been a tight race with him and the Dukes.

Elite Marine 12-24-2006 08:34 AM

Re: Tyler Crockett Marine
 
Tyler who? :D

One of the best!!!

johnnyoffshore 01-06-2007 01:29 PM

Re: Tyler Crockett Marine
 

Originally Posted by docmanrich37 (Post 1971492)
All he did was remove the stripper pole and Chris from it and it went 8 mph faster. :evilb:


LMAO!!! :D

Wardey 01-06-2007 02:51 PM

Re: Tyler Crockett Marine
 
Enough...enough....His prices are going to go up and his head wont fit his helmet anymore !!!!!:D :D :D :drink: Dave

johnnyoffshore 01-07-2007 08:06 AM

Re: Tyler Crockett Marine
 
Tyler is a great guy, he took the time to help me select a custom grind cam specs for my motor.


All times are GMT -5. The time now is 07:43 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.