Trailer fender needed
 

I am looking for an aluminum fender for my fathers single axle
fish boat trailer. The trailer is an aluminum magic tilt. The fender is slick aluminum ( not diamond plate ) It is over a 14"
wheel. Magic tilt says that they quit using the slick aluminum fenders after 2003 & went to the diamond plate. I was hoping someone on here is either a dealer & has one in stock , or knows someone who does ect... Here are the measurements. Thanks , Scott

Re: Trailer fender needed
 

http://www.championtrailers.com/

Got one last year.

Re: Trailer fender needed
 

racer-x6 I appritiate the link. We called them right after we talked to Magic Tilt & they also no longer carry smooth aluminums all they have are the diamond plate ones.:(

Re: Trailer fender needed
 

Let me look around the shop tonight and see what I Have.

Re: Trailer fender needed
 

I really appritiate it. Just let me know.

Re: Trailer fender needed
 

no luck, sorry

Re: Trailer fender needed
 

Thats ok , I really appritiate you taking the time to look. Thanks alot.
We are still searching around. Who would ever think that a simple fender would be so hard to locate.

Re: Trailer fender needed
 

might try these guys
http://www.etrailerpart.com/mywebs/m...FQJBUQodCC36jg


finman

Re: Trailer fender needed
 

Check with Bill at Performance Custom Trailers in Lake George , NY he may be able to help you out. 518 668-3103

Re: Trailer fender needed
 

Just buy two diamond plate one's. They aren't expensive. I bought a couple a few years ago. Seems they were about $30 each.

Re: Trailer fender needed
 

Did you try these guys. Being Saber is made near GR they may have worked with them in the past. I have an Integrity trailer and they referred me to them when I needed a part.

Richfield Trailer Supply
7245 Division Ave S
Grand Rapids, MI 49548

(616) 281-3220

Re: Trailer fender needed
 

Thanks guys I will give these guys a shout.
Cuda This may sound silly but we just aren't that crazy about the looks of the diamondplate fenders. But if that is all we can get it's not that big of a deal & that is what we will go with. Thanks again to all.

Re: Trailer fender needed
 

I also am not a big fan of the diamond plate fenders. They are better to stand on but they also get dirtier.....

Jon

Re: Trailer fender needed
 

We have one on the way !!!! :D :D
Although I have several emails & phone calls out, The only place we could find one is through Amera Trail in St. Cloud FL.
Thanks everyone for all the help.

Re: Trailer fender needed
 

Wayne Redmond, West Coast Trailers 949-254-9360. He can get just about anything!