Trailer fender needed
02-06-2007 | 02:14 PM
#1
Thread Starter
Registered
Joined: Apr 2005
Posts: 2,197
Likes: 3
From: TN
Trailer fender needed
I am looking for an aluminum fender for my fathers single axle
fish boat trailer. The trailer is an aluminum magic tilt. The fender is slick aluminum ( not diamond plate ) It is over a 14"
wheel. Magic tilt says that they quit using the slick aluminum fenders after 2003 & went to the diamond plate. I was hoping someone on here is either a dealer & has one in stock , or knows someone who does ect... Here are the measurements. Thanks , Scott
fish boat trailer. The trailer is an aluminum magic tilt. The fender is slick aluminum ( not diamond plate ) It is over a 14"
wheel. Magic tilt says that they quit using the slick aluminum fenders after 2003 & went to the diamond plate. I was hoping someone on here is either a dealer & has one in stock , or knows someone who does ect... Here are the measurements. Thanks , Scott
Last edited by littledcsrodshop; 02-06-2007 at 02:18 PM.
02-06-2007 | 03:53 PM
#2
Registered
Joined: Mar 2001
Posts: 1,454
Likes: 0
From: Mississippi
02-06-2007 | 04:23 PM
#3
Thread Starter
Registered
Joined: Apr 2005
Posts: 2,197
Likes: 3
From: TN
Re: Trailer fender needed
racer-x6 I appritiate the link. We called them right after we talked to Magic Tilt & they also no longer carry smooth aluminums all they have are the diamond plate ones.
02-07-2007 | 01:19 PM
#7
Thread Starter
Registered
Joined: Apr 2005
Posts: 2,197
Likes: 3
From: TN
Re: Trailer fender needed
Thats ok , I really appritiate you taking the time to look. Thanks alot.
We are still searching around. Who would ever think that a simple fender would be so hard to locate.
We are still searching around. Who would ever think that a simple fender would be so hard to locate.
02-07-2007 | 04:12 PM
#8
Registered
Joined: Apr 2001
Posts: 620
Likes: 0
From: Broken Arrow/GLOC OK
Re: Trailer fender needed
