Powder coat
#1
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Powder coat
Couldn't find the old thread. Finally got the manifold refinished and assembled (I'm way behind schedule on this project, but what else is new) so I thought I'd post a picture to show the stacks with the powder coat Slingshot did. Thanks for a great job.
-Greg
-Greg
#4
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: Powder coat
Yes. The motor was "supposed" to be assembled and in the car by now so I can send it off to paint. I have all the new parts, just havn't had time (and weather so I can move the 1970 Vette out of the garage to make room) working on my side.
-Greg
-Greg
#6
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: Powder coat
I spent about an hour talking with the dyno guy over at Tony's Corvette last weekend. Were going to dyno the motor in the car so we can also program the trans. "Might" make it this fall ... but I'm not swearing to it.
What kind of EFI programming do you do? I've got an Accel Gen 7 to drive the EFI conversion for the Hilborn.
-Greg
What kind of EFI programming do you do? I've got an Accel Gen 7 to drive the EFI conversion for the Hilborn.
-Greg