What is this stuff worth?
02-08-2007 | 03:30 PM
#1
Thread Starter
Registered
Joined: Feb 2005
Posts: 4,333
Likes: 5
From: USA
What is this stuff worth?
I have:
2 - Whipple fuel mgmt. computers.
2 - MEFI 2 or 3 computers with harnesses.
4 - BBC rectangle port heads with 400 hrs on them that are perfect.
2 - 454 MPI MAG roller cams with 400 hrs - perfect also.
What is this stuff worth? Do you want any of it?
2 - Whipple fuel mgmt. computers.
2 - MEFI 2 or 3 computers with harnesses.
4 - BBC rectangle port heads with 400 hrs on them that are perfect.
2 - 454 MPI MAG roller cams with 400 hrs - perfect also.
What is this stuff worth? Do you want any of it?
02-08-2007 | 03:34 PM
#2
Registered
Joined: Jun 2003
Posts: 920
Likes: 0
From: Oklahoma
Re: What is this stuff worth?
Thanks!
02-09-2007 | 02:58 PM
#3
Charter Member # 55
Joined: Oct 2000
Posts: 20,257
Likes: 2,505
From: Omaha/LOTO
Heads worth around $600 a set.
02-09-2007 | 03:09 PM
#4
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
are these heads from carb or efi setup. What chamber size? Where do you have them? Have they ever had work done, valve seats etc...
02-10-2007 | 11:43 AM
#5
Thread Starter
Registered
Joined: Feb 2005
Posts: 4,333
Likes: 5
From: USA
The heads are gen 6 from a 454 MPI MAG. I listed them on e-bay
http://cgi.ebay.com/ebaymotors/ws/eB...6186&rd=1&rd=1
They have never been touched. Compression checked on the engines prior to removal. They showed to be excellent. I have all the non-adjustable rocker arms & studs that go with them.
http://cgi.ebay.com/ebaymotors/ws/eB...6186&rd=1&rd=1
They have never been touched. Compression checked on the engines prior to removal. They showed to be excellent. I have all the non-adjustable rocker arms & studs that go with them.
02-10-2007 | 01:55 PM
#6
Charter Member
Joined: Oct 2003
Posts: 2,732
Likes: 2
belongs in swap shop or classifieds
Thread
Thread Starter
Forum
Replies
Last Post
Full Force
General Boating Discussion
25
10-18-2007 09:45 PM
