![]() |
Whippled 525 EFI
Anyone whippled this motor.What was your result? Kit Price? 27 cat w/ the 525 4300 lbs -- 83 mph w/ 5 blade...
|
Originally Posted by lavey5150
(Post 2024541)
Anyone whippled this motor.What was your result? Kit Price? 27 cat w/ the 525 4300 lbs -- 83 mph w/ 5 blade...
|
I can get the kit at a good price and it works well now.
|
3 Attachment(s)
This is a Profile 28 cat with our 525 EFI supercharger system as featured in Hot Boat October 06. This system made 875 HP on Arizona Speed & Marine's dyno.
A similar 500 EFI system in a Profile 28 cat at LOTO ran 104 after drive height and prop changes. This system made 800 HP on Precision Marine's dyno. Centrifugal superchargers don't make as much low RPM torque, but XR drives are living in this application. Tom |
It doesnt matter just whipple-it. That was my plan for my 27 daytona but its got to go to soon. My buddy ran a 26 daytona with a 500 hp and a whipple and was getting 98-99 out of it. So my thoght was my 27 with a 525 would see just over 100. running mid 80's stock best of 88 with a xr drive and a shortie lower.
|
Originally Posted by JCPERF
(Post 2024677)
I can get the kit at a good price and it works well now.
|
A 26-28 Cat needs just about 675HP to get to 100 mph. The 525 Whippled should make 725-750 that easily puts you over 100 mph.
|
| All times are GMT -5. The time now is 05:49 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.