Work coming along on the Condo
05-16-2007 | 08:18 AM
#293
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
61 @ 3600, last year was 57 mph.
87 @ 5300 with more to go, last year was 81 mph.
So far it's a 6 mph increase from last year. Also, last year I would run 3 lbs of boost at 4200 rpms, this year I'm running "0" boost at 4200 rpms. One of these days I'll mash the sticks forward, hold it, and let it all hang out.
With my cost-to-speed-increases I'm VERY happy with the results. 
PS, I could always turn up the boost for some more, we're at 75%!
87 @ 5300 with more to go, last year was 81 mph.
So far it's a 6 mph increase from last year. Also, last year I would run 3 lbs of boost at 4200 rpms, this year I'm running "0" boost at 4200 rpms. One of these days I'll mash the sticks forward, hold it, and let it all hang out.
With my cost-to-speed-increases I'm VERY happy with the results. PS, I could always turn up the boost for some more, we're at 75%!
Last edited by Panther; 05-16-2007 at 09:15 AM.
05-18-2007 | 02:32 PM
#294
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
05-18-2007 | 03:32 PM
#295
VIP Member
Joined: Feb 2004
Posts: 12,314
Likes: 1,556
From: Maryland
05-18-2007 | 07:39 PM
#297
Banned
Joined: Feb 2005
Posts: 1,459
Likes: 1
From: Cleveland, Ohio
[QUOTE=Panther;2132690]Good thing the motors are green! 
QUOTE]
Motors are electric Frank! When did JC get a job at GE? Engines are internal combustion. 
Very close to dyno......Just alot of little odds and ends. Your "Motors" do look very nice by the way!
QUOTE]Motors are electric Frank! When did JC get a job at GE? Engines are internal combustion.
Very close to dyno......Just alot of little odds and ends. Your "Motors" do look very nice by the way!
05-18-2007 | 07:44 PM
#298
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Fire them up, vroom vroom!
05-18-2007 | 07:52 PM
#300
Frank's Marine Service
Joined: Sep 2002
Posts: 11,959
Likes: 142
From: Elkton, MD
Please show Sak how to throttle cause bumpin off the rev limiters with the 700's isn't gonna be to good on that expensive valvetrain and BRAVO's!
