|
Originally Posted by JoeD
(Post 3226766)
When I get back to my office next week I will scan and post
|
Did you find it?
|
Specifications
Displacement 540 cubic inch cylinders 8 cyl Bore & Stroke 4.5 X 4.25 Compression 8.3 to 1 Full Throttle Rpm range 5400 Ignition type MSD/EFI Technologys alternator 90 amp spark plug & gap R-5671A-8 NGK Gap.030 oil change intervals 10 hrs oil type Kendall 20w50 oil filter Fram HP4 Fuel requirements 89 octane supercharger lube 80w90 non synthethetic dimensions height31.4 inches/width 28.5"/ length37.5" J.E pistons Carrillo 4340 forged steel rods 4340 steel crankshaft roller hydraulic camshaft Canfield alum heads Iron tall deck block 4 bolt mains Blower shop 8-71 supercharger Holley Throttle body-Programable EFI |
Originally Posted by JoeD
(Post 3236357)
Specifications
Displacement 540 cubic inch cylinders 8 cyl Bore & Stroke 4.5 X 4.25 Compression 8.3 to 1 Full Throttle Rpm range 5400 Ignition type MSD/EFI Technologys alternator 90 amp spark plug & gap R-5671A-8 NGK Gap.030 oil change intervals 10 hrs oil type Kendall 20w50 oil filter Fram HP4 Fuel requirements 89 octane supercharger lube 80w90 non synthethetic dimensions height31.4 inches/width 28.5"/ length37.5" J.E pistons Carrillo 4340 forged steel rods 4340 steel crankshaft roller hydraulic camshaft Canfield alum heads Iron tall deck block 4 bolt mains Blower shop 8-71 supercharger Holley Throttle body-Programable EFI |
Originally Posted by Cigaretteman
(Post 3236685)
Thank you very much! I am surprised by the full throttle rpm! My engines has the rev limitters set to 6.000 and I was told they have a max rpm of 5.800 to 6.000 depending of who I have asked. Anyone else turning them up to 5.800-6.000?
My engines were built using the exact specs above |
Keith Eickert 675 Engine i Need a fuel injecktor everyone know where i can Order?
|
Give Keith a call or text at 386-503-7585.
|
Throttle Body
[QUOTE=JoeD;3236357]Specifications
Displacement 540 cubic inch cylinders 8 cyl Bore & Stroke 4.5 X 4.25 Compression 8.3 to 1 Full Throttle Rpm range 5400 Ignition type MSD/EFI Technologys alternator 90 amp spark plug & gap R-5671A-8 NGK Gap.030 oil change intervals 10 hrs oil type Kendall 20w50 oil filter Fram HP4 Fuel requirements 89 octane supercharger lube 80w90 non synthethetic dimensions height31.4 inches/width 28.5"/ length37.5" J.E pistons Carrillo 4340 forged steel rods 4340 steel crankshaft roller hydraulic camshaft Canfield alum heads Iron tall deck block 4 bolt mains Blower shop 8-71 supercharger Holley Throttle body-Programable EFI[/QUOT. Hello du you know what Kind of injectores are in the Throttle Body ? I Need one of these |
Pretty sure he used holley projection tbi’s, but not sure which injector #.
Did you call and find out yet ? |
i replaced a set long ago i think they were gm truck throttle body injectors if you call or send one to a specialist they can tell you the part number then look at rock auto i have received many injectors from them good quality and good company
|
| All times are GMT -5. The time now is 10:22 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.