Gas Turbines
04-06-2007, 12:30 AM
#81
Registered
Join Date: Nov 2005
Location: Alcona Beach, Ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
The ad pretty much says it all...
http://www.offshoreonlyclassifieds.c...o15779-en.html
it is a brand new 50' nortech.. never been on the water... never been rigged for anything. We have the engines / drivetrain in house right now just waiting for the interior to get finished at Nortech.
These are absolutly the nicest engines ever to go through our shop. Zero timed with dyno run sheets rung out to Aerospace standard or better. 1500hp each and with the possibility of upgrading to 2000hp by next year for an additional $8500 each (Get the boat bought by the end of April and it includes FREE software upgrades for the TECC, normally $2500)
We are ready to rig, and the build slot is still open... could have this boat up and running early to middle of summer no problem. (If it sells now and we get it in here on time...) Somebody stands to get a wicked turbine NorTech... move quick though.
Any specific questions you might have please call me toll free 866-790-7702
http://www.offshoreonlyclassifieds.c...o15779-en.html
it is a brand new 50' nortech.. never been on the water... never been rigged for anything. We have the engines / drivetrain in house right now just waiting for the interior to get finished at Nortech.
These are absolutly the nicest engines ever to go through our shop. Zero timed with dyno run sheets rung out to Aerospace standard or better. 1500hp each and with the possibility of upgrading to 2000hp by next year for an additional $8500 each (Get the boat bought by the end of April and it includes FREE software upgrades for the TECC, normally $2500)
We are ready to rig, and the build slot is still open... could have this boat up and running early to middle of summer no problem. (If it sells now and we get it in here on time...) Somebody stands to get a wicked turbine NorTech... move quick though.
Any specific questions you might have please call me toll free 866-790-7702
06-03-2007, 03:22 PM
#83
Registered
Join Date: Nov 2005
Location: Alcona Beach, Ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
We are at the Lake Simcoe Regional Airport... right between Barrie and Orillia on hwy11. Hangar on the North side of the airport. Going to have this Nor-Tech on either Georgian or Simcoe this summer... I'll post around and let everyone know when we are going out to test. PM me and get me an e-mail address and we can get you over to see the shop if you are interested...
06-07-2007, 10:55 PM
#84
Registered
Join Date: Dec 2002
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Man I'm glad I asked the question! The only way I would turbine power a boat would be from someone who is reliable and knows how to make them work for a boat. The reason I asked about reliabilty is the guys over at the Aqua Toy Store said you always had to mess with them.The boat they have was one of Turbine Marines first installs.
The problem however was that they AquaToy store groupe supplied us with there own engines. The engines had been sitting in a military engine can for the lasr 10 years.
They where never serviced, then by there orders installed in the newley rigged boat.
The result of that, was where all the problems came from.
JA @ www.turbinemarine.com
Platinum Member
06-15-2007, 07:17 PM
#88
Registered
Join Date: Mar 2006
Location: 30,000 Islands Georgian Bay Ontario Canada
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
We are at the Lake Simcoe Regional Airport... right between Barrie and Orillia on hwy11. Hangar on the North side of the airport. Going to have this Nor-Tech on either Georgian or Simcoe this summer... I'll post around and let everyone know when we are going out to test. PM me and get me an e-mail address and we can get you over to see the shop if you are interested...
07-20-2007, 07:38 PM
#90
Registered
Join Date: Nov 2005
Location: Alcona Beach, Ontario
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Not sure of an alternate mumber.... just checked the one on my cell phone and it doesn't seem to work either... Do you need Ted specifically.... or can we help you with something...??
