I am interested in these new vents also. Keep me in the loop!
Eric

yea me too, just bought new ss vent for my barge to get more air to the engines but havent put them in yet. Where are you located? I get to the norfolk area a lot.

First 4 styles are avaliable, sizes are as follows;large with or without rakes(ribs) are 10 5/8" long by 4 5/8" at small end and 8 1/2" at wide end. Small with or with out rakes(ribs) are 8" long by 2 5/8" at small end to 6 1/4" at wide end.These are styled after NACA vents. Direct replacements of standard size vents are in the tooling and design stage now along with the "teardrop, naca " style that will require very little cutting for fit in existing old stlye vent cutouts.First 4 styles will be up for veiwing as soon as I can get a few good photos!!
Still looking for ideas, up to but not limited to custom race style hatches, anything is possible as long as there is a market for it!!
Thanks,
Steve

[ 01-13-2002: Message edited by: SpeedDoc ]

Above measurments are for the flanged style. For flush mount, simply grind flange and glass in place.

2 new vent style molds & 1 plug to be "popped" tue. Hopefully will have a total of 9 styles by weeks end!!! At least 8 more styles to follow. Pic's soon... waiting for decent cam to take photos.
Steve

Would like to see the pics. Keep us informed.

I need photos. I would like to see if they will fit in the space behind that horrible grill on the back of my Scarab. Also, any Idea on what they will co$t

i have a scarab excel wthe molded in grilss can tehy be updated? or is it a **** load of work?
http://www.puder.com/scarab/ for pics

Send us some photos and prices or some samples if you get a chance!
Chris 513.706-3199

Cig,
Joe is suppose to take some pic's of vents Wed. morning and we'll e-mail to you to insert in page. Also have EST. written for your hatch, how many inchs up?