Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Help Volvo DPX Drive problem (https://www.offshoreonly.com/forums/general-boating-discussion/159073-help-volvo-dpx-drive-problem.html)

C_Spray 06-01-2007 02:57 PM

To the top...

Kirk - I've given Dave first shot at everything. Drop me an email anyway through OSO. If Dave doesn't act, your next in line.

Scarabman - You have a PM.

Martymar - You have email.

Funny - 4 years ago, everyone trashed me for selecting these drives for my boat...

impalass53 07-25-2007 12:08 PM

Hey Guys, I have a 22' small power boat with a volvo dp drive. Bought it new in 1989. The only repair work on the drive in all that time is new universals. I am looking for something in the 27' to 30' range with a single or dula dpx. If anyone knows of something, Please let me know. Thanks in advance. Dave Hazen 319-931-3061 Iowa

sunseeker31 08-30-2022 06:09 AM


Originally Posted by C_Spray (Post 2139369)
No sweat. Gear ratio is determined by the lower unit. If you need something, let me know. I have a set of E3 props, a transom assembly, two DPX-R 1.59's and a DPX-A Upper that I don't really need. The DPX-A is actually complete, but needs a set of gears (it was a 1.47).

need 2 dpxr drives

scarabman 08-31-2022 03:44 PM

I would try Innovation Marine and All American Drive Service. Unlikely they have them, but possibly know where some may be. With NLA on quite a few of their components, they have become difficult to come by/somewhat valuable.

Outdoorsman1965 06-09-2023 07:22 AM

Outdoorsman1965
 

Originally Posted by sunseeker31 (Post 4843262)
need 2 DPX-R drives

I know this is an old thread, but did you ever find the 2 DPX-R's you were looking for? I know a guy who has 2 or at least did as of October of "22". Both are 1.47 ratio and both had been gone through by Innovation Marine. I am in bad need of a set of 1.47 gears right now. Innovation has my 2 DPX-A lowers right now and the pinion gear is bad in one. Any help is appreciated.

delsol 06-11-2023 09:10 AM

I sent you a pm. I have 2 dpx-a drives...


All times are GMT -5. The time now is 05:02 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.