monza 24 redone
#16
Registered
Thread Starter
You Guys have no idia what your comments means to me. It's been more than a year on this project and allot of wife's long face. But in the end I feel so good and looking forward in less than a month to test her. Oh and dont mind the trailer, I gonna buy a new one.
The following users liked this post:
neuer_Typ (05-03-2022)
#20
VIP Member
VIP Member
Looks Great! Nice Job!
Love the all white look.
Set your prop shaft 4 to 5 inches below the bottom. You may need a spacer if you're higher than 4" below.
70-75mph should be no problem spinning that 26p; the 24p is going to be too small.
My 24' Super will run 75mph any day of the week with a basically stock 502mag spinning a labbed 28p B1 @ 4800-4900rpm.
I know of a 24' Monza here in CT that runs over 80mph with 500HP.
Good Luck!
Love the all white look.
Set your prop shaft 4 to 5 inches below the bottom. You may need a spacer if you're higher than 4" below.
70-75mph should be no problem spinning that 26p; the 24p is going to be too small.
My 24' Super will run 75mph any day of the week with a basically stock 502mag spinning a labbed 28p B1 @ 4800-4900rpm.
I know of a 24' Monza here in CT that runs over 80mph with 500HP.
Good Luck!
__________________
Patrick
Patrick