Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Aries VS JE pistons (https://www.offshoreonly.com/forums/general-boating-discussion/166517-aries-vs-je-pistons.html)

HotPursuit 08-20-2007 09:01 PM
Originally Posted by H2Xmark (Post 2240180)
saw one that an engine builder took to much off the botom of the wrist pin boss on the piston to balance it, and it did not last long, hope this was not the issue for you.
No metal removed came from JE at 611 grms

HotPursuit 08-20-2007 09:03 PM
Originally Posted by mrhorsepower1 (Post 2240182)
Did it look like the piston seized or "black death"?
Wasn't much of piston to really tell and the block has no signs of scuffing. All the other pistons look like they were just removed from the box.


All times are GMT -5. The time now is 01:42 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.