I have never had a piston totally fail like this in 27 yrs.Anyone else having problems with JE pistons.This was the reason I missed emerald coast,what a *****.The rest were perfect and only about 10 hrs run time.After comparing the two JE is no comparison to the aries pistons i allways ran.

Did the wrist pin seize up to cause that?

Hard to say but all were set up with the same clearance.The pin was still lose in the rod.I have burnt my share and have had wrist pin failures but nothing compared to this the piston was gone. Thanks

All we use are JE pistons. Never an issue.

Holy Sh@t Keith!!!

Where is the rest of the piston?
Whats the head look like?

I know things happen,not knocking JE just wondering? The pistons dont even have color under the back side.
Thanks for the input. HP

Most of the piston was in the bottom of the oil pan. The head looks good,the engine was still running just was smoking out the exhaust. How you making out with the new psi blowers?Good to hear from you! Sh@t happens trying to make LOTO.
Skater Brother

saw one that an engine builder took to much off the botom of the wrist pin boss on the piston to balance it, and it did not last long, hope this was not the issue for you.

Did it look like the piston seized or "black death"?

Ouch!!