|
Originally Posted by VegasHallett
(Post 2253272)
Still have the rotating assy. plus heads/cool fuel, fuel pump/throttle body/injectors/valve covers/ intake manifold.....
If your in need of something PM me and I'll see if I can help you out. |
Originally Posted by VegasHallett
(Post 2253272)
Still have the rotating assy. plus heads/cool fuel, fuel pump/throttle body/injectors/valve covers/ intake manifold.....
If your in need of something PM me and I'll see if I can help you out. |
sold
|
What fuel system are you runnin? I can see you got rid of that d*mn VST system that comes on that generation 502, which I plan to do this fall. Did you switch to the "cool fuel" system, or something similar? I see you've got new fuel rails and injectors, but I can't see the pump. NICE project!! I love this stuff!!!
|
2 Attachment(s)
sold
|
Pretty cool! We did a side mount project on 454 MPI's & am VERY happy with how they operate!
|
Nice
Have you considered the twisting momentum against 4 pieces of all-thread used to secure the upper intake. I would at least pin the upper and lower intake together. Other than that I completed a similar project this past June on a pair of 468. It was a blast.
What ECU are you using, MEFI 1, 2, 3, or other? Best of luck:ernaehrung004: |
sold
|
The motors that tunertech is talking about are mine. They are actually 454's. We made a little over 650 hp on the stock intake manifold.
|
sold
|
| All times are GMT -5. The time now is 02:29 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.