The 509 that came out of my old 27 excalibur (pictured above). It pushed that boat 80 so we'll so what happens.

Sorry Bruce couldn't give you everything

Do you know what kind of power the engine is making?

I never dynoed it, but I would say 550hp is a safe number.

JDub, I've got the motor for that boat! Don re-built it .Let me know if your interested. Dave

Great thread !! Those Corsa's have great lines...

Any recent pictures ?

This was the corsa martini hull they used as a plug to make the newer style hull.80's vintage.1st offshore boat 1/2" of gel coat fairing material and a piece of wood to make the spalsh rail. Took about 4 months to sand all the gel off and straighten the hull. ran great with b/b trs set-up.

Here you go Scott:

Couple of the carbon fiber dash and gauges. Plus the back seat I made and had covered...it matches damn close to the seats.

Dude the boat looks really good !! great project !!

What did you end up setting the X-dim. at ?

18 1/4", that will put my prop shaft centerline about 3 1/2" below the keel. I can always go down. It's just more expensive to go up