New to the board.
10-20-2007 | 11:41 PM
#32
Registered
Joined: May 2004
Posts: 596
Likes: 1
From: Okanagan Falls BC. Canada
Intruder , you had a much smoother welcoming party over at Speedwake , eh . So how's your crappy Mirage with the bellows issue [ J/K , this is Mirage257 from SW ] ? Did you check your distributor yet ?
10-22-2007 | 04:49 AM
#33
Thread Starter
Registered
Joined: Oct 2007
Posts: 25
Likes: 0
From: Barrie, Ontario, Canada
Hey Mirage 257.. nice to see a familar face...
The boat comes out today.. winterizing, and an outdrive going over..will replace u joints, gimble bearings, and bellows.. oh and an impeller.. plus check alignment and real seal er up...I figure better safe than sorry..I am goign to take down all serial numbrs and pot to see just what outdrive I have..
Cheers.
The boat comes out today.. winterizing, and an outdrive going over..will replace u joints, gimble bearings, and bellows.. oh and an impeller.. plus check alignment and real seal er up...I figure better safe than sorry..I am goign to take down all serial numbrs and pot to see just what outdrive I have..
Cheers.
10-22-2007 | 09:44 AM
#34
Thread Starter
Registered
Joined: Oct 2007
Posts: 25
Likes: 0
From: Barrie, Ontario, Canada
