nxt drives, are the gremlins out or what???
10-31-2007 | 11:35 AM
#11
Registered
Joined: Aug 2004
Posts: 57
Likes: 0
From: St. Petersburg, FL
NO problems on my 2008 Donzi 43ZR with triple 700's NXT drive boat. About 20 hours on it, flat and rough conditions. The only complaint is they have not resolved the stiff shift. They shift slightly harder then a Bravo. #6's shift smoother then both. Other then that you will love them!
10-31-2007 | 04:29 PM
#16
Thread Starter
Registered
Joined: Sep 2003
Posts: 7,775
Likes: 1
From: San Francisco CA
why dont i tell eveyone you still have no idea of top speed, cause you have no speedo or gps, you never dynoed those motors, you built by yourself, you got the wrong carbs then broke barry grant balls about your makin a mistake, then all the parts you made by yourself that fell off, then you blew your drives up, with motors you still have no idea what power they are putting out and you did this on a brand new skater, that if peter knew how you were gonna make this boat 1/2 skater/bayliner he would have never let you leave the factory with it...
pro1- 32 hermaphrodite
power- unknown
drives- unsure
rigged by - ummmm well get back to you on that one
props- he borrows them till he wrecks them, then waits till he gets his tax check ack till he fixes them..
driver- one is not needed, boat is never in the water
sticks- they never go past halfway, he cant use more than 15 gall at a time
trailer- well even though i tell guys with doug wrights to get high end trailer to complete th package, i built my own.. again, im a putz.....
pro1 is a putz in every sense of the word..... ask me anything abou him, ill tellya everything about him and his 32 hermaphrodite....
10-31-2007 | 04:47 PM
#18
Registered
Joined: Dec 2004
Posts: 1,820
Likes: 5
From: Turku, Finland
hey kenny, why dont i tell everyone you were broke more than you were on the water and you're too f ing cheap to do anythig right, and try and rig it so it only makes sense to you..
why dont i tell eveyone you still have no idea of top speed, cause you have no speedo or gps, you never dynoed those motors, you built by yourself, you got the wrong carbs then broke barry grant balls about your makin a mistake, then all the parts you made by yourself that fell off, then you blew your drives up, with motors you still have no idea what power they are putting out and you did this on a brand new skater, that if peter knew how you were gonna make this boat 1/2 skater/bayliner he would have never let you leave the factory with it...
pro1- 32 hermaphrodite
power- unknown
drives- unsure
rigged by - ummmm well get back to you on that one
props- he borrows them till he wrecks them, then waits till he gets his tax check ack till he fixes them..
driver- one is not needed, boat is never in the water
sticks- they never go past halfway, he cant use more than 15 gall at a time
trailer- well even though i tell guys with doug wrights to get high end trailer to complete th package, i built my own.. again, im a putz.....
pro1 is a putz in every sense of the word..... ask me anything abou him, ill tellya everything about him and his 32 hermaphrodite....
why dont i tell eveyone you still have no idea of top speed, cause you have no speedo or gps, you never dynoed those motors, you built by yourself, you got the wrong carbs then broke barry grant balls about your makin a mistake, then all the parts you made by yourself that fell off, then you blew your drives up, with motors you still have no idea what power they are putting out and you did this on a brand new skater, that if peter knew how you were gonna make this boat 1/2 skater/bayliner he would have never let you leave the factory with it...
pro1- 32 hermaphrodite
power- unknown
drives- unsure
rigged by - ummmm well get back to you on that one
props- he borrows them till he wrecks them, then waits till he gets his tax check ack till he fixes them..
driver- one is not needed, boat is never in the water
sticks- they never go past halfway, he cant use more than 15 gall at a time
trailer- well even though i tell guys with doug wrights to get high end trailer to complete th package, i built my own.. again, im a putz.....
pro1 is a putz in every sense of the word..... ask me anything abou him, ill tellya everything about him and his 32 hermaphrodite....
They must be some powerful engines while breaking everything in the drive department with only half WOT ?
10-31-2007 | 04:55 PM
#19
Registered
Joined: Sep 2004
Posts: 7,076
Likes: 0
hey kenny, why dont i tell everyone you were broke more than you were on the water and you're too f ing cheap to do anythig right, and try and rig it so it only makes sense to you..
why dont i tell eveyone you still have no idea of top speed, cause you have no speedo or gps, you never dynoed those motors, you built by yourself, you got the wrong carbs then broke barry grant balls about your makin a mistake, then all the parts you made by yourself that fell off, then you blew your drives up, with motors you still have no idea what power they are putting out and you did this on a brand new skater, that if peter knew how you were gonna make this boat 1/2 skater/bayliner he would have never let you leave the factory with it...
pro1- 32 hermaphrodite
power- unknown
drives- unsure
rigged by - ummmm well get back to you on that one
props- he borrows them till he wrecks them, then waits till he gets his tax check ack till he fixes them..
driver- one is not needed, boat is never in the water
sticks- they never go past halfway, he cant use more than 15 gall at a time
trailer- well even though i tell guys with doug wrights to get high end trailer to complete th package, i built my own.. again, im a putz.....
pro1 is a putz in every sense of the word..... ask me anything abou him, ill tellya everything about him and his 32 hermaphrodite....
why dont i tell eveyone you still have no idea of top speed, cause you have no speedo or gps, you never dynoed those motors, you built by yourself, you got the wrong carbs then broke barry grant balls about your makin a mistake, then all the parts you made by yourself that fell off, then you blew your drives up, with motors you still have no idea what power they are putting out and you did this on a brand new skater, that if peter knew how you were gonna make this boat 1/2 skater/bayliner he would have never let you leave the factory with it...
pro1- 32 hermaphrodite
power- unknown
drives- unsure
rigged by - ummmm well get back to you on that one
props- he borrows them till he wrecks them, then waits till he gets his tax check ack till he fixes them..
driver- one is not needed, boat is never in the water
sticks- they never go past halfway, he cant use more than 15 gall at a time
trailer- well even though i tell guys with doug wrights to get high end trailer to complete th package, i built my own.. again, im a putz.....
pro1 is a putz in every sense of the word..... ask me anything abou him, ill tellya everything about him and his 32 hermaphrodite....
